Development of Holonomic Omnidirectional Vehicle

Riichiro Damoto; Shigeo Hirose

doi:10.20965/jrm.2002.p0186

single-rb.php

« previous

JRM Vol.14 No.2 pp. 186-192

doi: 10.20965/jrm.2002.p0186

(2002)

Paper:

Views over last 60 days: 464

Development of Holonomic Omnidirectional Vehicle "Vuton-II" with Omni-Discs

Riichiro Damoto and Shigeo Hirose

Tokyo Institute of Technology, 2-12-1 0-okayama Meguro-ku Tokyo, 152-8552, Japan

Received:

November 29, 2001

Accepted:

December 17, 2001

Published:

April 20, 2002

Keywords:

omnidirectional vehicle, Omni-Disc

Abstract

In this paper, we focus on a new omni-directional vehicle "The Vuton-II" that was developed for use as a transport vehicle to operate within factories, hospitals and warehouses. This vehicle is composed of using three or more "Omni-Discs". Its mechanism ensures that individual wheels of the assembly are always aligned in the same direction, and can always roll freely. The Vuton-II is designed to be low in cost, short in stature, and to bear a reasonably high payload.

Cite this article as:

R. Damoto and S. Hirose, “Development of Holonomic Omnidirectional Vehicle "Vuton-II" with Omni-Discs,” J. Robot. Mechatron., Vol.14 No.2, pp. 186-192, 2002.

Data files:

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.