single-rb.php

JRM Vol.11 No.4 pp. 263-268
doi: 10.20965/jrm.1999.p0263
(1999)

Paper:

Air Impact Drive for Positioning by Pulse and Continuous Air Pressure

Mohammad Hossein Kouklan*, Yousef Hojjat** and Toshiro Higuchi*

*Department of Precision Machinery Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan

**School of Engineering, Tarbiat Modarres University, P.O. Box 14155-4838, Tehran, Iran

Received:
April 13, 1999
Accepted:
June 4, 1999
Published:
August 20, 1999
Keywords:
precise positioning, impulse actuators, impact drive, slip-stick drive
Abstract
In recent years, the application of impacts to precise positioning has been increased. Previously, the impulsive force or impact was generated by electromagnetic impulsive force or by the sudden deformation of a piezoelement. In this paper, a new actuator named as Air Impact Drive (AID) is introduced, in which the impact is generated by impulsive air pulse pressure. Free body diagrams and equations of this new actuator were drawn and determined. Experimental and theoretical results are in good agreement. The new actuator could displace a 0.2kg object at 0.1 of millimeter per pulse by pulse air pressure. By implementing suitable setup of parameters, the AID could move the object by continuous, constant air pressure with good linearity. This property is unique among other impact drives for positioning. By 0.3Mpa of source air pressure, the new actuator could move the mentioned object at the speed of approximately 13.4mm/s.
Cite this article as:
M. Kouklan, Y. Hojjat, and T. Higuchi, “Air Impact Drive for Positioning by Pulse and Continuous Air Pressure,” J. Robot. Mechatron., Vol.11 No.4, pp. 263-268, 1999.
Data files:

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Dec. 06, 2024