single-rb.php

JRM Vol.9 No.1 pp. 71-78
doi: 10.20965/jrm.1997.p0071
(1997)

Paper:

Project and Experimentation of a Photoacoustic Cell

G. Belforte*, T. Raparelli**, V Viktorov*, G. Eula*, A. Ivanov*

*Department of Mechanics-Politecnico di Torino C.so Duca degli Abruzzi, 24-10129 Torino (Italy)

**Department of Energetics-Universita’di L’Aquila, 67040 Roio Poggio-L’Aquila (Italy)

Received:
April 21, 1996
Accepted:
May 28, 1996
Published:
February 20, 1997
Keywords:
Photoacoustic cell,optopneumatic converter, Photothermic interfaces, optopneumatic interfaces, Photofluidic devices
Abstract

A new kind of control device is here presented. It is realized through no-one electrical components so that it can be also used in environments where there is a danger of explosion, fire or electromagnetic interference. Its principal way of working is based on the photothermic effect, in which the energy of an optical source (infrared source in this case) is converted into heat energy through an absorbent body. So it is possible to increase the temperature of the air close to the absorbent body and to obtain a pneumatic signal that can be used as a control signal in a high-gain laminar fluidic amplifier.

Cite this article as:
G. Belforte, T. Raparelli, V Viktorov, G. Eula, and A. Ivanov, “Project and Experimentation of a Photoacoustic Cell,” J. Robot. Mechatron., Vol.9, No.1, pp. 71-78, 1997.
Data files:

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Oct. 15, 2021