JRM Vol.8 No.3 pp. 226-234
doi: 10.20965/jrm.1996.p0226


Hybrid Position and Force Control Without Force Sensor

Kiyoshi Ohishi*, Masaru Miyazaki** and Masahiro Fujita**

* Nagaoka University of Technology, 1603-1 Kamitomioka-cho, Nagaoka, Niigata, 940-21 Japan

** Osaka Institute of Technology, 5-16-1 Omiya, Asahi-ku, Osaka, 535 Japan

February 1, 1996
February 15, 1996
June 20, 1996
Force estimation, Hybrid control, H control theory, Torque observer, Acceleration control
Generally, hybrid control is realized by sensor signal feedback of position and force. However, some robot manipulators do not have a force sensor due to the environment. Moreover, a precise force sensor is very expensive. In order to overcome these problems, we propose the estimation system of reaction force without using a force sensor. This system consists of the torque observer and the inverse dynamics calculation. Using both this force estimation system and H acceleration controller which is based on H control theory, it takes into account the frequency characteristics of both sensor noise effect and disturbance rejection. The experimental results in this paper illustrate the fine hybrid control of the three tested degrees-of-freedom DD robot manipulator without force sensor.
Cite this article as:
K. Ohishi, M. Miyazaki, and M. Fujita, “Hybrid Position and Force Control Without Force Sensor,” J. Robot. Mechatron., Vol.8 No.3, pp. 226-234, 1996.
Data files:

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 19, 2024