JRM Vol.5 No.5 pp. 427-433
doi: 10.20965/jrm.1993.p0427


Drive of a Piezoelectric Cycloid Motor in a High Frequency Range

Iwao Hayashi*, Nobuyuki Iwatsuki** and Koosuke Fujimoto***

* Faculty of Engineering, Tokyo Institute of Technology, 2-12-1 Ohokayama, Meguro-ku, Tokyo, 152 Japan

** Precision and Intelligence Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama, 227 Japan

*** Research Center of Production Technology, Canon Inc., 3-30-2 Shimo-maruko, Ohta-ku, Tokyo, 146 Japan

August 2, 1993
August 12, 1993
October 20, 1993
Motor, Piezoactuator, Gear, Cycloid gear, Gear mechanism
A piezoelectric cycloid motor was proposed by the authors, and their experiments revealed that the rotational principle was effective and that the motor kept its rotational speed constant up to its maximum output torque. However, the maximum torque was small, and the rotational accuracy was poor. In this report, the motor is driven in a high frequency range including the motor's resonance frequency to obtain improved characteristics. Because the driving amplitude of the stator is increased by resonance, the inertial effect of the stator is expected. As a result, the maximum output torque has been increased to six times, while the rotational accuracy has been much improved.
Cite this article as:
I. Hayashi, N. Iwatsuki, and K. Fujimoto, “Drive of a Piezoelectric Cycloid Motor in a High Frequency Range,” J. Robot. Mechatron., Vol.5 No.5, pp. 427-433, 1993.
Data files:

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on May. 19, 2024