JDR Vol.15 No.3 pp. 335-343
doi: 10.20965/jdr.2020.p0335

Survey Report:

Improving River Bathymetry and Topography Representation of a Low-Lying Flat River Basin by Integrating Multiple Sourced Datasets

Seemanta Sharma Bhagabati*,†, Akiyuki Kawasaki*, Wataru Takeuchi**, and Win Win Zin***

*Department of Civil Engineering, The University of Tokyo
7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan

Corresponding author

**Industrial Institute of Science, The University of Tokyo, Tokyo, Japan

***Yangon Technological University, Yangon, Myanmar

August 9, 2019
February 27, 2020
March 30, 2020
Digital Elevation Model (DEM), cross-section survey, river bathymetry, topography, Myanmar

Topography represented in the form of Digital Elevation Models (DEMs) has profound applications in hydrological modeling. DEMs can be generated from several sources including satellite products, contours, survey data, and LiDAR, each with their own merits and demerits. Where high resolution, accuracy, and spatial extent are concerned, it is often found that a DEM from one source alone is not able to represent the topography of the target area with full accuracy. Upon comparing different DEMs, it was found that most were able to successfully represent mountainous regions but failed to represent flat deltaic regions. Therefore, in this research with Bago River basin, Myanmar as a study area, a new methodology to combine multiple sources of data with different data types is developed. The inputs are: (a) a 10 m DEM, developed using contour data, point elevation data, and UTM topographic maps; (b) a 5 m Digital Surface Model (DSM) acquired by the Advanced Land Observation Satellite (ALOS); and (c) 168 sets of multiple-point elevation data representing a cross-sectional survey along the Bago River and the Bago-Sittaung canal. The output is a 10 m resolution Enhanced DEM (EnDEM) which is able to preserve the merits of all the input data, i.e., upper mountainous region, lower flat deltaic basin, and the river bathymetry. This paper provides a novel approach to DEM integration and burning of the river cross-section onto the DEM.

Cite this article as:
S. Bhagabati, A. Kawasaki, W. Takeuchi, and W. Zin, “Improving River Bathymetry and Topography Representation of a Low-Lying Flat River Basin by Integrating Multiple Sourced Datasets,” J. Disaster Res., Vol.15 No.3, pp. 335-343, 2020.
Data files:
  1. [1] P. A. Burrough and R. A. McDonnell, “Principles of Geographical Information Systems,” Oxford University Press, 1998.
  2. [2] K. J. Bhang, F. W. Schwartz, and A. Braun, “Verification of the vertical error in C-band SRTM DEM using ICES at and Landsat-7, Otter Tail County, MN,” IEEE Trans. Geosci. Remote Sens., Vol.45, Issue 1, doi: 10.1109/TGRS.2006.885401, pp. 36-44, 2007.
  3. [3] D. Athmania and H. Achour, “External validation of the ASTER GDEM2, GMTED2010 and CGIAR-CSI-SRTM v4.1 free access digital elevation models (DEMs) in Tunisia and Algeria,” Remote Sens., Vol.6, No.5, pp. 4600-4620, doi: 10.3390/rs6054600, 2014.
  4. [4] E. Suwandana, K. Kawamura, Y. Sakuno, E. Kustiyanto, and B. Raharjo, “Evaluation of ASTER GDEM2 in comparison with GDEM1, SRTM DEM and topographic-map-derived DEM using inundation area analysis and RTK-DGPS data,” Remote Sens., Vol.4, No.8, pp. 2419-2431, doi: 10.3390/rs4082419, 2012,
  5. [5] X. Du et al., “Vertical accuracy assessment of SRTM and ASTER GDEM over typical regions of china using ICESat/GLAS,” Diqiu Kexue – Zhongguo Dizhi Daxue Xuebao (Earth Sci.– J. China Univ. Geosci.), Vol.38, No.4, pp. 887-897, 2013.
  6. [6] K. Fujita, R. Suzuki, T. Nuimura, and A. Sakai, “Performance of ASTER and SRTM DEMs, and their potential for assessing glacial lakes in the Lunana region, Bhutan Himalaya,” J. Glaciol., Vol.54, Issue 185, pp. 220-228, doi: 10.3189/002214308784886162, 2008.
  7. [7] S. Mukherjee et al., “Evaluation of vertical accuracy of open source Digital Elevation Model (DEM),” Int. J. Appl. Earth Obs. Geoinf., Vol.21, pp. 205-217, doi: 10.1016/j.jag.2012.09.004, 2013.
  8. [8] O. I. Bildirici, A. Ustun, Z. H. Selvi, A. R. Abbak, and I. Bugdayci, “Assessment of shuttle radar topography mission elevation data based on torographic maps in Turkey,” Cartogr. Geogr. Inform. Sci., Vol.36, Issue 1, pp. 95-104, doi: 10.1559/152304009787340205, 2009.
  9. [9] C. Jing, A. Shortridge, S. Lin, and J. Wu, “Comparison and validation of SRTM and ASTER GDEM for a subtropical landscape in Southeastern China,” Int. J. Digital Earth, Vol.7, Issue 12, doi: 10.1080/17538947.2013.807307, 2013,
  10. [10] A. Sharma, K. N. Tiwari, and P. B. S. Bhadoria, “Vertical accuracy of digital elevation model from Shuttle Radar Topographic Mission – a case study,” Geocarto Int., Vol.25, Issue 4, pp. 257-267, doi: 10.1080/10106040903302931, 2010.
  11. [11] I. K. Tsanis, K. D. Seiradakis, I. N. Daliakopoulos, M. G. Grillakis, and A. G. Koutroulis, “Assessment of GeoEye-1 stereo-pair-generated DEM in flood mapping of an ungauged basin,” J. Hydroinform, Vol.16, no.1, pp. 1-18, doi: 10.2166/hydro.2013.197, 2014.
  12. [12] W. Wang, X. Yang, and T. Yao, “Evaluation of ASTER GDEM and SRTM and their suitability in hydraulic modelling of a glacial lake outburst flood in southeast Tibet,” Hydrol. Process, Vol.26, Issue 2, pp. 213-225, doi: 10.1002/hyp.8127, 2012.
  13. [13] W. W. Zin et al., “Flood Hazard Assessment of Bago River Basin, Myanmar,” J. Disaster Res., Vol.13, No.1, pp. 14-21, doi: 10.20965/jdr.2018.p0014, 2018.
  14. [14] S. S. Bhagabati and A. Kawasaki, “Consideration of the rainfall-runoff-inundation (RRI) model for flood mapping in a deltaic area of Myanmar,” Hydrological Research Letters, Vol.11, No.3, pp. 155-160, doi: 10.3178/hrl.11.155, 2017.
  15. [15] D. Yamazaki, D. Ikeshima, R. Tawatari, T. Yamaguchi, F. O’Laughlin, J. C. Neal, C. C. Sampson, S. Kanae, and P. D. Bates, “A high-accuracy map of global terrain elevations,” Geophysical Research Letters, Vol.44, Issue 11, pp. 5844-5853, doi: 10.1002/2017GL072874, 2017.
  16. [16] A. M. Khaing, “Mapping Flood Inundation in the Bago River Basin, Myanmar,” Master Thesis, Asian Institute of Technology, Thailand, 2014.
  17. [17] C. Dal Cin, L. Moens, P. H. Dierickx, G. Bastin, and Y. Zech, “An integrated approach for realtime floodmap forecasting on the Belgian Meuse River,” Natural Hazards, Vol.36, pp. 237-256, doi: 10.1007/s11069-004-4551-x, 2005.
  18. [18] S. J. Winterbottom and D. J. Gilvear, “Quantification of channel bed morphology in gravel-bed rivers using airborne multispectral imagery and aerial photography,” Regulated Rivers: Research & Management, Vol.13, Issue 6, pp. 489-499, 1997.
  19. [19] W. A. Marcus and M. A. Fonstad, “Optical remote mapping of rivers at sub-meter resolutions and watershed extents,” Earth Surface Processes and Landforms, Vol.33, Issue 1, pp. 4-24, doi: 10.1002/esp.1637, 2008.
  20. [20] R. M. Westaway, S. N. Lane, and D. M. Hicks, “The development of an automated correction procedure for digital photogrammetry for the study of wide, shallow, gravel-bed rivers,” Earth Surface Processes and Landforms, Vol.25, Issue 2, pp. 209-226, 2000.
  21. [21] S. N. Lane, “The use of digital terrain modelling in the understanding of dynamic river channel systems,” S. N. Lane, K. S. Richards, and J. H. Chandler (Eds.), “Landform Monitoring, Modelling, and Analysis,” pp. 311-342, Wiley, 1998.
  22. [22] E. C. Tate, D. R. Maidment, F. Olivera, and D. J. Anderson, “Creating a terrain model for floodplain mapping,” J. of Hydrologic Engineering, Vol.7, Issue 2, pp. 100-108, doi: 10.1061/(ASCE)1084-0699(2002)7:2(100), 2002.
  23. [23] M. Flanagin, A. Grenotton, J. Ratcliff, K. B. Shaw, J. Sample, and M. Abdelguerfi, “Hydraulic splines: a hybrid approach to modeling river channel geometries,” Computing in Science and Engineering, Vol.9, Issue 5, pp. 4-15, doi: 10.1109/MCSE.2007.99, 2007.
  24. [24] R. C. Hilldale and D. Raff, “Assessing the ability of airborne LiDAR to map river bathymetry,” Earth Surface Processes and Landforms, Vol.33, Issue 5, pp. 773-783, doi: 10.1002/esp.1575, 2008.
  25. [25] B. Schäppi, P. Perona, P. Schneider, and P. Burlando, “Integrating river cross section measurements with digital terrain models for improved flow modelling applications,” Computers & Geosciences, Vol.36, pp. 707-716, doi: 10.1016/j.cageo.2009.12.004, 2010.
  26. [26] D. Caviedes-Voullième et al., “Reconstruction of 2D river beds by appropriate interpolation of 1D cross-sectional information for flood simulation,” Environmental Modelling & Software, Vol.61, pp. 206-228, doi: 10.1016/j.envsoft.2014.07.016, 2014.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on May. 10, 2024