Evaluation of Grinding Wheel Surface Shape on Difference Multiple Helical Dressing Condition
Gen Uchida*,, Takazo Yamada*, Kouichi Ichihara**, Makoto Harada**, Kohichi Miura***, and Hwa-Soo Lee*
*College of Science and Technology, Nihon University
1-8-14, Kanda-surugadai, Chiyoda-ku, Tokyo 101-8308, Japan
**Sumitomo Heavy Industries, Ltd., Yokosuka, Japan
***Nihon University Junior College, Funabashi, Japan
In the grinding process, a grinding wheel surface is a tool that is directly applied to the workpiece. As the condition of the grinding wheel surface is determined by its dressing conditions, the ability to accurately measure the grinding wheel surface with an applied dressing would enable the prediction of the ground surface characteristics of the workpiece as well as the determination of optimum dressing conditions. Recently, a new dressing method called the multiple helical dressing was proposed, which has led to improvements in the grinding performance. However, there is still no method to quantitatively evaluate the changes in the grinding wheel surface condition caused by multiple helical dressings. In this study, we measured the grinding wheel surface applied with multiple helical dressings using a so-called measured focus position recalculation method to determine whether we can quantitatively evaluate the measured dressing grooves generated on the grinding wheel surface by multiple helical dressings, and the resultant undulated grinding wheel surface shapes. We ground an actual workpiece to demonstrate the effects of changes in the grinding wheel surface shape due to multiple helical dressings on the ground surface of the workpiece. The experimental results show that our proposed measuring method can accurately measure the changes in the grinding wheel surface condition due to multiple helical dressings. We also proposed a method to evaluate the dressing grooves to prove that we can quantitatively evaluate the measurement results of dressing grooves generated by multiple helical dressings. In addition, we evaluated undulated grinding wheel surface shapes as its cylindricities by extracting only the undulation shapes generated by multiple helical dressings. Finally, we performed groove grinding with a grinding wheel applied with multiple helical dressings to reveal the relationship between the ground surface of the workpiece and the grinding wheel surface condition, which demonstrated the effectiveness of multiple helical dressings.
-  M. Fujimoto, S. Ohishi, R. Hinaga, and Y. Kubo, “Wheel Working Surface Topography and Grinding Force Distributions in Creep Feed Grinding,” Int. J. Automation Technol., Vol.12, No.2, pp. 223-229, 2018.
-  T. Orioka, “Theory of Probability on Generating Process of Finished Surface in Grinding Operation,” J. Jpn. Soc. Mech. Eng., Vol.63, No.499, pp. 1185-1193, 1960 (in Japanese).
-  K. Suzuki and K. Takahashi, “Studies on the Dressing of Grinding Wheel (1st Report) – Measurement on the Number of Grains per Unit Area by the Point Counting Method, and Variation of Dressed Surfaces –,” J. Jpn. Soc. Precis. Eng., Vol.30, No.350, pp. 246-252, 1964 (in Japanese).
-  S. Matsui and J. Tamaki, “Studies on Measuring Method of Wheel Surface Topography (4th Report) – Stylus Method –,” J. Jpn. Soc. Precis. Eng., Vol.50, No.4, pp. 672-678, 1984 (in Japanese).
-  K. Syoji, L. Zhou, and S. Matsui, “Studies on truing and dressing of diamond wheels (1st Report) – The measurement of protrusion height of abrasive grains by using a stereo pair and the influence of protrusion height on grinding performance –,” J. Jpn. Soc. Precis. Eng., Vol.55, No.5, pp. 865-870, 1989 (in Japanese).
-  E. Goto, M. Touge, and Y. Ohbuchi, “In-process Measurement of Wear of Abrasive Grain (4th Report) – High-Speed Visualization for Wheel Working Face –,” J. Jpn. Soc. Precis. Eng., Vol.65, No.12, pp. 1804-1808, 1999 (in Japanese).
-  A. Hosokawa, H. Yasui, M. Nagase, and K. Sato, “Characterization of the Grinding Wheel Surface by Means of Image Processing (2nd Report) – Tracking Measurement of Surface Topography of Grinding Wheel in Grinding Process –,” J. Jpn. Soc. Precis. Eng., Vol.65, No.10, pp. 1440-1444, 1999 (in Japanese).
-  T. Kawashita, A. Sakaguchi, T. Kawaguchi, S. Matui, J. Maeda, and S. Matsuo, “Three-dimensional measurement of wheel surface topography with image processing (4th Report) – High-speed image acquisition by the line camera and analysis of cutting edge distribution using a Voronoi diagram –,” J. Jpn. Soc. Abras. Technol., Vol.60, No.8, pp. 442-447, 2016 (in Japanese).
-  T. Suto, T. Waida, and T. Sata, “In-Process Measurement of Working Wheel Surface in Grinding Operations,” J. Jpn. Soc. Precis. Eng., Vol.36, No.429, pp. 676-682, 1970 (in Japanese).
-  M. Fujimoto, Y. Wu, M. Nomura, H. Kanai, and M. Jin, “Surface Topography of Mini-Size Diamond Wheel in Ultrasonic Assisted Grinding (UAG),” Int. J. Automation Technol., Vol.8, No.4, pp. 569-575, 2014.
-  H. Sakamoto and S. Shimizu, “On-machine measurement method of grinding wheel cutting edge density considering grain holding stiffness,” J. Jpn. Soc. Abras. Technol., Vol.54, No.7, pp. 431-436, 2010 (in Japanese).
-  H. S. Lee, T. Yamada, and M. Kobayashi, “Development of a 3-D Measuring Equipment for Surface Geometries of Grinding Wheel Surfaces,” Proc. of the ASPE 2006 Annual Meeting, pp. 10-13, 2006.
-  Y. Kakino, A. Matubara, I. Yamaji, K. Matuda, H. Nakagawa, T. Hirogaki, and Y. Kita, “A Study on Measuring Surface Topography of Grinding wheel on the Machine (1st Report) – Development of Measuring System using a Laser Stylus –,” J. Jpn. Soc. Precis. Eng., Vol.63, No.2, pp. 228-232, 1997 (in Japanese).
-  G. Uchida, T. Yamada, and K. Miura, “Evaluation of Grinding Wheel Surface Shape by Different Dressing Condition,” Proc. of the 8th Int. Conf. of Asian Society for Precision Engineering and Nanotechnology, C03, 2019.
-  G. Uchida, T. Yamada, K. Miura, and H. S. Lee, “Measurement of grinding wheel surface shape by measured focus position recalculation method,” J. Jpn. Soc. Abras. Technol., Vol.64, No.3, pp. 140-145, 2020 (in Japanese).
-  ISO 25178-6:2010, “Geometrical product specifications (GPS) – Surface texture: Areal – Part 6: Classification of methods for measuring surface texture,” 2010.
-  A. Sato, “Non-contact Measuring Methods for Areal Surface Texture,” J. Jpn. Soc. Precis. Eng., Vol.81, No.10, pp. 922-925, 2015 (in Japanese).
-  K. Miura, T. Matsuba, T. Tsukamoto, H. Hirose, and H. Kotajima, “Development and Practicality of a Point Autofocus Probe Ultra-precision 3D Whole Circumference Measuring Instrument (MLP-2SP),” J. Jpn. Soc. Precis. Eng., Vol.81, No.2, pp. 113-116, 2015 (in Japanese).
-  K. Miura and A. Nose, “Accuracy verification of a point autofocus instrument for freeform 3D measurement,” Proc. of the 20th Int. Symp. on Advances in Abrasive Technology, pp. 1080-1084, 2017.
-  K. Ichihara, “Dress mark effect on roundness of grinding wheel and principle of multiple helical dressing and its grinding effect,” J. Jpn. Soc. Abras. Technol., Vol.63, No.7, pp. 365-371, 2019 (in Japanese).
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.