A Strategic Design Guideline for Open Business Models
Yusuke Tsutsui, Nao Yamada, Yuya Mitake, Mar’atus Sholihah, and Yoshiki Shimomura
Department of Mechanical System Engineering, Graduate School of System Design, Tokyo Metropolitan University
6-6 Asahigaoka, Hino-shi, Tokyo 191-0065, Japan
To realize a competitive product-service system, a manufacturer is required to change its closed business model and develop open and sustainable alliances with external partners. As an alternative business model, an open business model (OBM) is a new concept, replacing the closed model, that is highly dependent on the company’s resources. An OBM is realized via resource sharing and collaboration with external partners. By incorporating an OBM in its operations, a company can receive several benefits, such as long-term profits, by providing new customer value and diversifying risks due to uncertainty in the market environment. A considerable number of studies related to this concept have been conducted. However, a practical method for OBM design remains unavailable. It is therefore difficult to design an OBM via actual design procedures. To this end, the purpose of this study is to support a design for OBMs. To achieve this, eight dimensions of openness in OBMs are first identified. On the basis of these dimensions, the requirements for an OBM design guideline are defined, and the design guideline is proposed. The proposed design guideline includes three steps: requirement analysis, OBM design, and validation. The proposed method was applied in an OBM design workshop, and the usefulness of the design guideline was verified through an evaluation of the eight openness dimensions. Finally, directions for improving the design guideline are discussed as future works.
-  A. Tukker, “Eight types of product-service system: Eight ways to sustainability? Experiences from suspronet,” Business Strategy and the Environment, Vol.13, No.4, pp. 246-260, doi: 10.1002/bse.414, 2004.
-  M. Sholihah, Y. Mitake, T. Nakada, and Y. Shimomura, “Innovative design method for a valuable product-service system: Concretizing multi-stakeholder requirements,” J. of Advanced Mechanical Design, Systems and Manufacturing, Vol.13, No.5, pp. 1-12, doi: 10.1299/jamdsm.2019jamdsm0091, 2019.
-  H. W. Chesbrough, “Open business models: How to thrive in the new innovation landscape,” Harvard Business School Press, 2006.
-  A. Osterwalder and Y. Pigneur, “Business model generation – A handbook for visionaries, game changers and challengers striving to defy outmoded business models and design tomorrow’s enterprises,” John Wiley & Sons, doi: 10.1523/JNEUROSCI.0307-10.2010, 2010.
-  D. Tapscott and A. D. Williams, “Wikinomics: How mass collaboration changes everything,” Penguin, doi: 10.1111/j.1468-0270.2008.864_2.x, 2008.
-  S. L. Vargo and R. F. Lusch, “Evolving to a new dominant Logic for Marketing,” J. of Marketing, Vol.68, No.1, pp. 1-17, doi: 10.1509/jmkg.126.96.36.19936, 2004.
-  S. Djelassi and I. Decoopman, “Customers’ participation in product development through crowdsourcing: Issues and implications,” Industrial Marketing Management, Vol.42, No.5, pp. 683-692, doi: 10.1016/j.indmarman.2013.05.006, 2013.
-  C. Cheng, “Dynamic service innovation capability, radical service innovation and open business models,” Int. J. of Services Technology and Management, Vol.16, Nos.3-4, pp. 229-242, doi: 10.1504/IJSTM.2011.044357, 2011.
-  H. W. Chesbrough, “Why companies should have open business models,” MIT Sloan Management Review, Vol.48, No.2, pp. 22-28, doi: 10.3139/9783446452848.035, 2007.
-  T. Weiblen, “The Open business model: Understanding an emerging concept,” J. of Multi Business Model Innovation and Technology, Vol.2, No.1, pp. 35-66, doi: 10.13052/jmbmit2245-456x.212, 2016.
-  M. Khumalo and E. van der Lingen, “The open business model in a dynamic business environment: A literature review,” South African J. of Industrial Engineering, Vol.28, No.3 (Special Edition), pp. 147-160, doi: 10.7166/28-3-1851, 2017.
-  H. W. Chesbrough, “Why bad things happen to good technology,” Wall Street J. – Eastern Edition, Vol.249, No.99, R11, 2007.
-  S. M. Davey, M. Brennan, B. J. Meenan, and R. McAdam, “A framework to manage the innovation strategies of new technology based firms,” First Int. Technology Management Conf., pp. 1007-1013, doi: 10.1109/ITMC.2011.5995997, 2011.
-  M. Purdy, M. C. Robinson, and K. Wei, “Three new business models for ‘the open firm,’” Strategy and Leadership, Vol.40, No.6, pp. 36-41, doi: 10.1108/10878571211278877, 2012.
-  F. D. Sandulli and H. W. Chesbrough, “The two sides of open business models,” SSRN, pp. 1-25, doi: 10.2139/ssrn.1325682, 2009.
-  R. Sheets and S. Crawford, “Harnessing the power of information technology: Open business models in higher education,” Educause Review, Vol.47, No.2, pp. 34-48, 2012.
-  A. B. Holm, F. Günzel, and J. P. Ulhøi, “Openness in innovation and business models: Lessons from the newspaper industry,” Int. J. of Technology Management, Vol.61, Nos.3-4, pp. 324-348, doi: 10.1504/IJTM.2013.052674, 2013.
-  D. Romero and A. Molina, “Collaborative networked organisations and customer communities: value co-creation and co-innovation in the networking era,” Production Planning & Control, Vol.22, Nos.5-6, pp. 447-472, doi: 10.1080/09537287.2010.536619, 2011.
-  R. Casadesus-Masanell and J. E. Ricart, “From strategy to business models and onto tactics,” Long Range Planning, Vol.43, Nos.2-3, pp. 195-215, doi: 10.1016/j.lrp.2010.01.004, 2010.
-  R. Casadesus-Masanell and J. E. Ricart, “How to design a winning business model,” Harvard Business Review, Vol.89, pp. 100-107, 2011.
-  H. W. Chesbrough, “Business model innovation: It’s not just about technology anymore,” Strategy and Leadership, Vol.35, No.6, pp. 12-17, doi: 10.1108/10878570710833714, 2007.
-  M. Morris, M. Schindehutte, and J. Allen, “The entrepreneur’s business model: Toward a unified perspective,” J. of Business Research, Vol.58, No.6, pp. 726-735, doi: 10.1016/j.jbusres.2003.11.001, 2005.
-  J. Magretta, “Why business models matter,” Harvard Business Review, Vol.80, No.5, pp. 3-8, 2002.
-  P. H. Coombes and J. D. Nicholson, “Business models and their relationship with marketing: A systematic literature review,” Industrial Marketing Management, Vol.42, No.5, pp. 656-664, doi: 10.1016/j.indmarman.2013.05.005, 2013.
-  T. Saebi and N. J. Foss, “Business models for open innovation: Matching heterogeneous open innovation strategies with business model dimensions,” European Management J., Vol.33, No.3, pp. 201-213, doi: 10.1016/j.emj.2014.11.002, 2015.
-  H. W. Chesbrough and K. Schwartz, “Innovating business models with co-development partnerships,” Research Technology Management, Vol.50, No.1, pp. 55-59, doi: 10.1080/08956308.2007.11657419, 2007.
-  H. W. Chesbrough, “Open innovation: The new imperative for creating and profiting from technology,” Harvard Business School Press, doi: 10.4324/9781315276670-9, 2003.
-  E. Enkel and O. Gassmann, “Creative imitation: Exploring the case of cross-industry innovation,” R&D Management, Vol.40, No.3, pp. 256-270, doi: 10.1111/j.1467-9310.2010.00591.x, 2010.
-  K. Frankenberger, T. Weiblen, and O. Gassmann, “Network configuration, customer centricity, and performance of open business models: A solution provider perspective,” Industrial Marketing Management, Vol.42, No.5, pp. 671-682, doi: 10.1016/j.indmarman.2013.05.004, 2013.
-  K. Storbacka, P. Frow, S. Nenonen, and A. Payne, “Designing business models for value co-creation,” Review of Marketing Research, Vol.9, pp. 51-78, doi: 10.1108/S1548-6435(2012)0000009007, 2012.
-  S. Kortmann and F. Piller, “Open business models and closed-loop value chains: Redefining the firm-consumer relationship,” California Management Review, Vol.58, No.3, pp. 88-108, doi: 10.1525/cmr.2016.58.3.88, 2016.
-  Uber Technologies Inc., “Uber.” https://www.uber.com/jp/en/ [Accessed July 14, 2020]
-  Apple Inc., “iTunes store.” https://www.apple.com/itunes/ [Accessed July 14, 2020]
-  NTT DATA Mathematical Systems Inc., “Visual Analytics Platform.” http://www.msi.co.jp/english/ [Accessed July 14, 2020]
-  Y. Shimomura, K. Kimita, and F. Akasaka, “Development of pragmatical methods to support manufactures servicification,” J. of the Japan Society for Precision Engineering, Vol.78, No.3, pp. 185-191, doi: 10.2493/jjspe.78.185, 2012.
-  G. R. Bitran and M. Lojo, “A framework for analyzing service operations,” European Management J., Vol.11, No.3, pp. 271-282, 1993.
-  A. Osterwalder, Y. Pigneur, G. Bernarda, A. Smith, and T. Papadakos, “Value proposition design: How to create products and services customers want,” Central European Business Review, Vol.2014, No.4, pp. 1-52, doi: 10.18267/j.cebr.104, 2014.
-  J. C. Anderson, J. A. Narus, and W. van Rossum, “Customer value propositions in business markets,” Harvard Business Review, Vol.84, No.3, pp. 91-99, 2006.
-  T. Sakao and Y. Shimomura, “Service engineering: A novel engineering discipline for producers to increase value combining service and product,” J. of Cleaner Production, Vol.15, No.6, pp. 590-604, doi: 10.1016/j.jclepro.2006.05.015, 2007.
-  G. Pahl and W. Beitz, “Engineering design: A systematic approach,” Springer Science & Business Media, 1988.
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.