single-au.php

IJAT Vol.12 No.6 pp. 947-954
doi: 10.20965/ijat.2018.p0947
(2018)

Paper:

Customized End Milling Operation of Dental Artificial Crown Without CAM Operation

Isamu Nishida, Ryo Tsuyama, Ryuta Sato, and Keiichi Shirase

Kobe University
1-1 Rokko-dai, Nada-ku, Kobe, Hyogo 657-8501, Japan

Corresponding author

Received:
May 7, 2018
Accepted:
July 4, 2018
Published:
November 5, 2018
Keywords:
intelligent machine tool, CAM-CNC integration, cutting force simulation, dental artificial crown
Abstract

A new methodology to generate instruction commands for real-time machine control instead of preparing NC programs is developed under the CAM-CNC integration concept. A machine tool based on this methodology can eliminate NC program preparation, achieve cutting process control, reduce production lead time, and realize an autonomous distributed factory. The special feature of this methodology is the generation of instruction commands in real time for the prompt machine control instead of NC programs. Digital Copy Milling (DCM), which digitalizes copy milling, is realized by referring only to the CAD model of the product. Another special feature of this methodology is the control of the tool motion according to the information predicted by a cutting force simulator. This feature achieves both the improvement in the machining efficiency and the avoidance of machining trouble. In this study, the customized end milling operation of a dental artificial crown is realized as an application using the new methodology mentioned above. In this application, the CAM operation can be eliminated for the NC program generation, and tool breakage can be avoided based on the tool feed speed control from the predicted cutting force. The result shows that the new methodology has good potential to achieve customized manufacturing, and can realize both high productivity and reliable machining operation.

Cite this article as:
I. Nishida, R. Tsuyama, R. Sato, and K. Shirase, “Customized End Milling Operation of Dental Artificial Crown Without CAM Operation,” Int. J. Automation Technol., Vol.12 No.6, pp. 947-954, 2018.
Data files:
References
  1. [1] D. Hamada, K. Nakamoto, T. Ishida, and Y. Takeuchi, “Development of CAPP System for Multi-Tasking Machine Tool,” Trans. of the Japan Society of Mechanical Engineers Series C, Vol.78, No.791, pp. 2698-2709, 2012.
  2. [2] N. Sugimura, “Research trends in process planning,” J. of the Japan Society for Precision Engineering, Vol.72, No.2, pp. 165-170, 2006.
  3. [3] A. Ueno and K. Nakamoto, “Proposal of machining features for CAPP system for multi-tasking machine tools,” Trans. of the Japan Society of Mechanical Engineers, Vol.81, No.825, 15-00108, 2015.
  4. [4] M. El-Mehalawi and R. A. Miller, “A database system of mechanical components based on geometric and topological similarity. Part I: representation,” Computer-Aided Design, Vol.35, No.1, pp. 83-94, 2003.
  5. [5] M. El-Mehalawi and R. A. Miller, “A database system of mechanical components based on geometric and topological similarity. Part II: indexing, retrieval, matching and similarity assessment,” Computer-Aided Design, Vol.35, No.1, pp. 95-105, 2003.
  6. [6] I. Nishida, R. Sato, and K. Shirase, “Proposal of Process Planning System for End-Milling Operation Considering Product Design Constraints,” The Institute of Systems, Control and Information Engineering, Vol.30, No.3, pp. 81-86, 2017.
  7. [7] K. Dwijayanti and H. Aoyama, “Basic study on process planning for turning-milling center based on machining feature recognition,” J. of Advanced Mechanical Design, Systems and Manufacturing, Vol.8, No.4, JAMDSM0058, 2014.
  8. [8] H. Sakurai and P. Dave, “Volume decomposition and feature recognition, part I: polyhedral objects,” Computer-Aided Design, Vol.27, Issue 11, pp. 793-869, 1995.
  9. [9] H. Sakurai and P. Dave, “Volume decomposition and feature recognition, part II: curved objects,” Computer-Aided Design, Vol.28, Issues 6-7, pp. 519-537, 1996.
  10. [10] K. Shirase, T. Kondo, M. Okamoto, H. Wakamatsu, and E. Arai, “Development of Virtual Copy Milling System to Realize NC Programless Machining (Real Time Tool Path Generation for Autonomous NC Machine Tool),” Trans. of the Japan Society of Mechanical Engineers Series C, Vol.66, No.644, pp. 1368-1373, 2000.
  11. [11] K. Nakamoto, K. Shirase, H. Wakamatsu, A. Tsumaya, and E. Arai, “Development of Digital Copy Milling System to Realize NC Programless Machining: 3rd Report, Machining Strategy for In-Process Adaptation of Cutting Conditions,” Trans. of the Japan Society of Mechanical Engineers Series C, Vol.69, No.677, pp. 270-277, 2003.
  12. [12] K. Shirase and K. Nakamoto, “Direct Machining Operation Performed by Autonomous NC Machine Tool Controlled by Digital Copy Milling Concept,” Trans. of the Japan Society of Mechanical Engineers Series C, Vol.74, No.743, pp. 1901-1906, 2008.
  13. [13] K. Shirase and K. Nakamoto, “Simulation Technologies for the Development of an Autonomous and Intelligent machine Tool,” Int. J. Automation Technol., Vol.7, No.1, pp. 6-15, 2013.
  14. [14] T. Kobayashi, T. Hirooka, A. Hakotani, R. Sato, and K. Shirase, “Tool Motion Control Referring Voxel Information of Removal Volume Voxel Model to Achieve Autonomous Milling Operation,” Trans. of the Japan Society of Mechanical Engineers Series C, Vol.79, No.808, pp. 4572-4581, 2013.
  15. [15] K. Shirase, T. Shimada, and K. Nakamoto, “Prototyping of Autonomous CNC Machine Tool Based on Digital Copy Milling Concept,” Proc. of the 41st CIRP Conf. on Manufacturing Systems, pp. 391-394, 2008.
  16. [16] T. Hasegawa, R. Sato, and K. Shirase, “Cutting Force Simulation Referring Workpiece Voxel Model for End-milling Operation and Adaptive Control Based on Predicted Cutting Force,” J. of the Japan Society for Precision Engineering, Vol.82, No.5, pp. 467-472, 2016.
  17. [17] T. Miyazaki, “Current Status and Future Perspective of Digital Prosthodontics,” Japan Prosthodontics Society, Vol.4, pp. 123-131, 2012.
  18. [18] K. Shirase, T. Kondo, M. Okamoto, H. Wakamatsu, and E. Arai, “Development of Virtual Copy Milling System to Realize NC Programless Machining: Real Time Tool Path Generation for Autonomous NC Machine Tool,” Trans. of the Japan Society of Mechanical Engineers Series C, Vol.66, No.644, pp. 298-303, 1999.
  19. [19] J. Tlusty and P. MacNeil, “Dynamics of Cutting Forces in End Milling,” CIRP Annals, Vol.24, No.1, pp. 21-25, 1975.
  20. [20] D. Mongomery and Y. Altintas, “Mechanism of cutting force and surface generation in dynamic milling,” J. of Engineering for Industry, Vol.113, No.2, pp. 160-168, 1991.
  21. [21] Y. Altintas and P. Lee, “A General Mechanics and Dynamics Model for Helical End Mills,” CIRP Annals, Vol.45, No.1, pp. 59-64, 1996.
  22. [22] K. Shirase and Y. Altintas, “Cutting force and dimensional surface error generation in peripheral milling with variable pitch helical end mills,” Int. J. of Machine Tools and Manufacture, Vol.36, No.5, pp. 567-584, 1996.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Oct. 11, 2024