Top > IJAT > R-Test Analysis Software for Error Calibration of Five-Axis Ma ...

single-au.php

IJAT Vol.9 No.4 pp. 387-395
doi: 10.20965/ijat.2015.p0387
(2015)

Paper:

Views over last 60 days: 2,597

R-Test Analysis Software for Error Calibration of Five-Axis Machine Tools – Application to a Five-Axis Machine Tool with Two Rotary Axes on the Tool Side –

Soichi Ibaraki*,†, Yu Nagai*, Hisashi Otsubo**, Yasutaka Sakai***, Shigeki Morimoto***, and Yosuke Miyazaki***

*Department of Micro Engineering, Kyoto University
Katsura, Nishigyo-ku, Kyoto 616-8540, Japan

**Otsubo Engineering Research Center, Fukuyama, Japan

***Fukuda Corporation, Tokyo, Japan

†Corresponding author

Received:
January 18, 2015
Accepted:
May 1, 2015
Published:
July 5, 2015
Creative Commons License
Keywords:
Metrology, R-test, five-axis machine tools, calibration, location error, error motion, geometric error.
Abstract
The R-test measures the three-dimensional displacement of a precision sphere, attached to a machine spindle, by using three displacement sensors fixed to the machine’s table. Its application to error calibration for five-axis machine tools has long been studied. This paper presents software for analyzing the measured R-test trajectories for error diagnosis and numerical compensation for rotary axis location errors and error motions. The developed software first graphically presents the measured R-test trajectories to help a user intuitively understand error motions of the rotary axes. It also numerically parameterizes the rotary axis geometric error parameters, and then generates a compensation table that can be implemented in some latest-generation commercial CNC systems. An actual demonstration of its application to a five-axis machine tool with a universal head (two rotary axes on the spindle side) is presented.
Cite this article as:
S. Ibaraki, Y. Nagai, H. Otsubo, Y. Sakai, S. Morimoto, and Y. Miyazaki, “R-Test Analysis Software for Error Calibration of Five-Axis Machine Tools – Application to a Five-Axis Machine Tool with Two Rotary Axes on the Tool Side –,” Int. J. Automation Technol., Vol.9 No.4, pp. 387-395, 2015.
Data files:
References
  1. [1] H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt, and F. Delbressine, “Geometric error measurement and compensation of machines – An update,” Annals of CIRP – Manufacturing Technology, Vol.57, No.2, pp. 560-575, 2008.
  2. [2] S. Ibaraki and W. Knapp, “Indirect Measurement of Volumetric Accuracy for Three-axis and Five-axis Machine Tools: A Review,” International Journal of Automation Technology, Vol.6, No.2, pp. 110-124, 2012.
  3. [3] ISO 10791-1:2014, “Test conditions for machining centres – Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis).”
  4. [4] Y. Kakino, Y. Ihara, H. Sato, and H. Otsubo, “A Study on the motion accuracy of NC machine tools (7th report) – Measurement of motion accuracy of 5-axis machine by DBB tests –.” Journal of Japan Society for Precision Engineering, Vol.60, No.5, pp. 718-723, 1994 (in Japanese).
  5. [5] M. Tsutsumi and A. Saito, “Identification and compensation of systematic deviations particular to 5-axis machining centers,” International Journal of Machine Tools and Manufacture, Vol.43, No.8, pp. 771-780, 2003.
  6. [6] Y. Ihara, “Ball Bar Measurement on Machine Tools with Rotary Axes,” International Journal of Automation Technology, Vol.6, No.2, pp. 180-187, 2012.
  7. [7] ISO 10791-6:2014, “Test conditions for machining centres – Part 6: Accuracy of speeds and interpolations.”
  8. [8] G. H. U. Florussen and H. A. M. Spaan, “Static R-Test: Allocating the Centreline of Rotary Axes of Machine Tools,” Proc. of the 8th Lamdamap Conference, pp. 196-202, 2007.
  9. [9] S. Weikert, “R-Test, a New Device for Accuracy Measurements on Five Axis Machine Tools,” Annals of CIRP – Manufacturing Technology, Vol.53, No.1, pp. 429-432, 2004.
  10. [10] B. Bringmann and W. Knapp, “Model-based ‘Chase-the-Ball’ calibration of a 5-axis machining center,” Annals of CIRP – Manufacturing Technology, Vol.55, No.1, pp. 531-534, 2006.
  11. [11] S. H. H. Zargarbashi and J. R. R. Mayer, “Single setup estimation of a five axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensors,” International Journal of Machine Tools and Manufacture, Vol.49, pp. 759-766, 2009.
  12. [12] W. T. Lei and Y. Y. Hsu, “Accuracy test of five-axis CNC machine tool with 3D probe-ball. Part I: design and modeling,” International Journal of Machine Tools and Manufacture, Vol.42, No.10, pp. 1153-1162, 2002.
  13. [13] Y. Ihara and Y. Hiramatsu, “Design of Motion Accuracy Measurement Device for NC Machine Tools with Three Displacement Sensors,” International Journal of Automation Technology, Vol.5, No.6, pp. 847-854, 2011.
  14. [14] S. Ibaraki and Y. Ota, “Error Calibration for Five-Axis Machine Tools by On-the-Machine Measurement Using a Touch-Trigger Probe,” International Journal of Automation Technology, Vol. 8, No.1, pp. 20-27, 2014.
  15. [15] ISO 230-1:2012, “Test code for machine tools – Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions.”
  16. [16] ISO 230-7:2006, “Test code for machine tools – Part 7: Geometric accuracy of axes of rotation.”
  17. [17] C. Hong, S. Ibaraki, and A. Matsubara, “Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools,” Precision Engineering, Vol.35, No.1, pp. 1-11, 2011.
  18. [18] S. Ibaraki, C. Oyama, and H. Otsubo, “Construction of an error map of rotary axes on a five-axis machining center by static R-test,” International Journal of Machine Tools and Manufacture, Vol.51, No.3, pp. 190-200. 2011.
  19. [19] C. Hong and S. Ibaraki, “Observation of Thermal Influence on Error Motions of Rotary Axes on a Five-Axis Machine Tool by Static R-Test,” International Journal of Automation Technology, Vol. 6, No.2, pp. 196-204, 2012.
  20. [20] C. Hong and S. Ibaraki, “Graphical presentation of error motions of rotary axes on a five-axis machine tool by static R-test with separating the influence of squareness errors of linear axes,” International Journal of Machine Tools and Manufacture, Vol.59, pp. 24-33, 2012.
  21. [21] I. Inasaki, K. Kishinami, S. Sakamoto, N. Sugimura, Y. Takeuchi, and F. Tanaka, “Shaper generation theory of machine tools – its basis and applications,” Yokendo, Tokyo, 1997 (in Japanese).
  22. [22] ISO/TR 16907:2015, “Numerical compensation of geometric errors of machine tools.”
  23. [23] T. Otsuki, “Compensation technologies for machine tool volumetric errors,” Proc. of Technical Committee of Ultra Precision Positioning, Vol.2012-1, pp. 27-38, 2012 (in Japanese).

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Sep. 09, 2024