High Precise Milling Process by cBN End Mills

Katsumi Naganuma; Masato Mori

doi:10.20965/ijat.2012.p0542

single-au.php

« previous

IJAT Vol.6 No.4 pp. 542-545

doi: 10.20965/ijat.2012.p0542

(2012)

Development Report:

Views over last 60 days: 729

High Precise Milling Process by cBN End Mills

Katsumi Naganuma and Masato Mori

NS Tool Co., Ltd., 4-5-9 Minamioi, Shinagawa-ku, Tokyo 140-0013, Japan

Received:

January 20, 2012

Accepted:

May 9, 2012

Published:

July 5, 2012

Keywords:

precision milling, micro milling, cBN end mill, direct-milling

Abstract

Molding technology is one way of producing the micro-precision parts required by various industries. To Advance this molding technology, various elemental technologies related to materials, construction and machiningmethods are evolving together. One of these elemental technologies is milling by end mill. Further research and development of end mill is underway in response to improvement and requirement of molding technologies. There are various demands for end mills such as improvement of tool life and stable machining quality. Here we report the small diameter cBN end mill, developed as a tool to provide with stable machining accuracy with long tool life for high hard materials. We report the investigations and characteristics at the time of development and show the machining test.

Cite this article as:

K. Naganuma and M. Mori, “High Precise Milling Process by cBN End Mills,” Int. J. Automation Technol., Vol.6 No.4, pp. 542-545, 2012.

Data files:

References

[1] T. Goto, K. Naganuma, J. Kurosawa, and S. Ishii, “Highly Precise and efficient Machining by small diameter cBN end mill,” Papers of 2006 Conf. on Die and Mold Technology, pp. 146-147, 2006.
[2] I. Goto, “Development of cBN Ball-Nosed End Mill with Newly Designed Cutting Edge,” pp. 76-81, 2005.
[3] I. Goto, “Development of cBN Ball-Nosed End Mill with Newly Designed Cutting Edge,” pp. 42-47, 2005.
[4] M. Mori, “High Accurate 3D Micromachining by cBN Radius End Mill,” Proc. of 2011 Conf. on Die and Mould Technology, pp. 120-121, 2011.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] T. Goto, K. Naganuma, J. Kurosawa, and S. Ishii, “Highly Precise and efficient Machining by small diameter cBN end mill,” Papers of 2006 Conf. on Die and Mold Technology, pp. 146-147, 2006.

[2] [2] I. Goto, “Development of cBN Ball-Nosed End Mill with Newly Designed Cutting Edge,” pp. 76-81, 2005.

[3] [3] I. Goto, “Development of cBN Ball-Nosed End Mill with Newly Designed Cutting Edge,” pp. 42-47, 2005.

[4] [4] M. Mori, “High Accurate 3D Micromachining by cBN Radius End Mill,” Proc. of 2011 Conf. on Die and Mould Technology, pp. 120-121, 2011.