Small Processing Machinery Effectiveness in Micropart Processing and Factory Construction with Desktop Production Equipment

Chiaki Endo

doi:10.20965/ijat.2010.p0155

single-au.php

« previous

IJAT Vol.4 No.2 pp. 155-159

doi: 10.20965/ijat.2010.p0155

(2010)

Development Report:

Views over last 60 days: 346

Small Processing Machinery Effectiveness in Micropart Processing and Factory Construction with Desktop Production Equipment

Chiaki Endo

Takashimasangyo Co., Ltd., 5695-6 Kanazawa, Chino, Nagano 391-0012, Japan

Received:

November 24, 2009

Accepted:

February 19, 2010

Published:

March 5, 2010

Keywords:

microfabrication, polishing, small factory, desktop-size, miniaturization, production

Abstract

The effects of inertia on production facilities due to working-tool mass and gravity must be minimized for microprocessing. Compact production facilities are expected to effectively solve this problem. Examples of effective facilities include in-house desktop production platforms and high-performance factories consisting of compact production equipment.

Cite this article as:

C. Endo, “Small Processing Machinery Effectiveness in Micropart Processing and Factory Construction with Desktop Production Equipment,” Int. J. Automation Technol., Vol.4 No.2, pp. 155-159, 2010.

Data files:

References

[1] Y. Okazaki, N. Mishima, and K. Ashida, “Microfactory-Concept, History and Developments,” Journal of Manufacturing Science and Engineering, Vol.126, No.4, pp. 837-844, 2004.
[2] H. K. Tonshoff and I. Inasaki, “Sensors Applications,” Vol.1, Senors in Manufacturing, 2001.
[3] T. Kurita and M. Hattori, “Development of New-Concept Desk Top Size Machine Tool,” International Journal of Machine Tools & Manufacture, 45-7-8, pp. 959-965, 2005.
[4] T. Kurita, M. Hattori, K. Iida, and S.Miyazawa, “A prototype of hybrid micro machine tool,” International Workshop on Environment Benign Manufacturing, pp. 81-86, 2000.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] Y. Okazaki, N. Mishima, and K. Ashida, “Microfactory-Concept, History and Developments,” Journal of Manufacturing Science and Engineering, Vol.126, No.4, pp. 837-844, 2004.

[2] [2] H. K. Tonshoff and I. Inasaki, “Sensors Applications,” Vol.1, Senors in Manufacturing, 2001.

[3] [3] T. Kurita and M. Hattori, “Development of New-Concept Desk Top Size Machine Tool,” International Journal of Machine Tools & Manufacture, 45-7-8, pp. 959-965, 2005.

[4] [4] T. Kurita, M. Hattori, K. Iida, and S.Miyazawa, “A prototype of hybrid micro machine tool,” International Workshop on Environment Benign Manufacturing, pp. 81-86, 2000.