Paper:
Views over last 60 days: 311
Development of Multi-Axis Cutting Method Using Non-Rotational Tool with Ultrasonic Vibration
Masafumi Yoshimaru*, Yasuhiro Fujita**, Tetsufumi Ito***, Masahide Kouya**** and Hiroshi Suzuki*****
*Department of Mechanical System Engineering, Graduate School of Engineering, Kyusyu Institute of Technology, 680-4 Kawazu, Iizuka, Fukuoka 820-8502, Japan
**Corporate R&D Center, YASKAWA Electric Corporation
***Manufacturing Technology Institute Inc.
****Fukuoka Prefectural Government
*****Kyusyu Institute of Technology
Received:August 29, 2007Accepted:November 3, 2007Published:March 5, 2008
Keywords:non-rotational cutting method, ultrasonic vibration, finish processing for steel
Abstract
In recent years, rotary tools such as ball and flat end mills are widely used to produce dies and parts. Machining using rotary tools shortens cutting time, raising efficiency and discharging cutting chips cleanly, but leaves the machined face rough due to arc-shaped rotation marks. The radius of rotation for the location of the cutting edge from the tool's center axis is non-consistent, varying tool edge cutting speed and direction, making it difficult to leave surface roughness uniform. Removing unfinished areas and reducing final machined face surface roughness to the submicron level thus requires secondary finishing, which conventionally relies on hand polishing by a skilled worker. We developed extremely small cut-in machining using a non-rotational tool to establish final die machine finishing. We discuss machining tests with ultrasonic vibration added to machine prehardened steel, used mainly as a die material, to a mirror finish using a nonrotational diamond tool, and evaluate its usefulness.
Cite this article as:M. Yoshimaru, Y. Fujita, T. Ito, M. Kouya, and H. Suzuki, “Development of Multi-Axis Cutting Method Using Non-Rotational Tool with Ultrasonic Vibration,” Int. J. Automation Technol., Vol.2 No.2, pp. 105-110, 2008.Data files:
