Recently, robotics and wearable technology have increased demand for actuators capable of delivering flexible and adaptive motions that rigid mechanisms cannot provide. Twisted and coiled polymer actuators (TCPAs) made from nylon fishing lines show promise owing to their low cost, ease of fabrication, and high deformation capabilities. However, conventional heating methods using copper or nichrome wires are frequently limited by low thermal response rates and durability issues. In this study, we introduce a new heating technique in which five conductive fibers are twisted together and uniformly wrapped around the TCPA to improve heat transfer efficiency and allow operation at higher input voltages. In addition, we propose a unit design that bundles multiple TCPAs into a helical fiber structure (CF‐HFS TCPA) for increased force generation. Experimental results show that the performance of single TCPA_CF units is strongly dependent on wire gauge: under light loads of approximately 1.96–2.45 N, finer wires achieve higher displacement ratios at high voltages, whereas under loads of approximately 2.94 N, their performance declines, while thicker wires maintain stable operation over a wider load range. Temperature measurements show that, while gauges achieve high surface temperatures under light loads, the temperature rise is reduced under heavy loads owing to reduced contraction and increased heat dissipation. Overall, these findings support the potential utility of our approach as an effective method for developing actuators for soft robotic and wearable applications.

1. [1] S. Kim, C. Laschi, and B. Trimmer, “Soft robotics: A bioinspired evolution in robotics,” Trends in Biotechnology, Vol.31, No.5, pp. 287-294, 2013. http://doi.org/10.1016/j.tibtech.2013.03.002
2. [2] P. Polygerinos, Z. Wang, K. C. Galloway, R. J. Wood, and C. J. Walsh, “Soft robotic glove for combined assistance and at-home rehabilitation,” Robotics and Autonomous Systems, Vol.73, pp. 135-143, 2015. http://doi.org/10.1016/j.robot.2014.08.014
3. [3] D. Rus and M. T. Tolley, “Design, fabrication and control of soft robots,” Nature, Vol.521, No.7553, pp. 467-475, 2015. https://doi.org/10.1038/nature14543
4. [4] B. Tondu, “Modelling of the McKibben artificial muscle: A review,” J. of Intelligent Material Systems and Structures, Vol.23, No.3, pp. 225-253, 2012. https://doi.org/10.1177/1045389X11435435
5. [5] F. Carpi, D. De Rossi, R. Kornbluh, R. Pelrine, and P. Sommer-Larsen, “Dielectric elastomers as electromechanical transducers: Fundamentals, Materials, Devices, Models and Applications of an Emerging Electroactive Polymer Technology,” Elsevier, 2008.
6. [6] T. Horiuchi, H. Nabae, and K. Suzumori, “Three-dimensional ion polymer–metal composite soft robots,” J. Robot. Mechatron., Vol.34, No.2, pp. 231-233, 2022. https://doi.org/10.20965/JRM.2022.P0231
7. [7] K. Takashima, Y. Okamura, J. Nagaishi, H. Cho, T. Noritsugu, and T. Mukai, “Development and application of shape-memory polymer and alloy composite sheets,” J. Robot. Mechatron., Vol.36, No.3, pp. 769-778, 2024. https://doi.org/10.20965/JRM.2024.P0769
8. [8] C. S. Haines, M. D. Lima, N. Li, G. M. Spinks, J. Foroughi, J. D. W. Madden, S. H. Kim, S. Fang, M. J. De Andrade, F. Götepe, Ö. Götepe, S. M. Mirvakili, S. Naficy, X. Lepró, J. Oh, M. E. Kozlov, S. J. Kim, X. Xu, B. J. Swedlove, G. G. Wallace, and R. H. Baughman, “Artificial muscles from fishing line and sewing thread,” Science, Vol.343, No.6173, pp. 868-872, 2014. https://doi.org/10.1126/science.1246906
9. [9] K. H. Cho, M. G. Song, H. Jung, J. Park, H. Moon, J. C. Koo, J.-D. Nam, and H. R. Choi, “A robotic finger driven by twisted and coiled polymer actuator,” Electroactive Polymer Actuators and Devices (EAPAD) 2016, 2016. https://doi.org/10.1117/12.2218957
10. [10] T. Tanaka, I. Matsuura, Y. Kato, and Y. Sato, “Processing technology of actuator fiber,” Research Report of Aichi Industrial Science and Technology Research Centre, pp. 108-111, 2021 (in Japanese).
11. [11] K. Tahara, R. Hayashi, K. Masuya, K. Takagi, T. Irisawa, T. Yamauchi, and E. Tanaka, “Rotational angle control of a twisted polymeric fiber actuator by an estimated temperature feedback,” IEEE Robotics and Automation Letters, Vol.4, No.3, pp. 2447-2454, 2019. https://doi.org/10.1109/LRA.2019.2901982
12. [12] K. Masuya, S. Ono, K. Takagi, and K. Tahara, “Development of actuator unit consisting of multiple twisted and coiled polymer actuators,” Proc. of JSME Annual Conf. on Robotics and Mechatronics (ROBOMECH 2017), 2017. https://doi.org/10.1299/jsmermd.2017.2a1-a02
13. [13] S. Sharafia and L. Guoqiang, “A mutliscale approach for modeling actuation response of polymeric artificial muscle,” Soft Matter, Vol.11, No.19, pp. 3833-3843, 2015. https://doi.org/10.1002/9783527617050
14. [14] M. C. Yip and G. Niemeyer, “High-performance robotic muscles from conductive nylon sewing thread,” 2015 IEEE Int. Conf. on Robotics and Automation (ICRA), pp. 2313-2318, 2015. https://doi.org/10.1109/ICRA.2015.7139506
15. [15] K. Masuya, K. Takagi, and K. Tahara, “Development of a finger support equipment using mandrel type of fishing line artificial muscle,” 17th SICE System Integration Division Lectures, 2016 (in Japanese).
16. [16] A. M. Swartz, D. R. H. Ruiz, H. P. Feigenbaum, M. W. Shafer, and C. C. Browder, “Experimental characterization and model predictions for twisted polymer actuators in free torsion,” Smart Materials and Structures, Vol.27, No.11, Article No.114002, 2018. https://doi.org/10.1088/1361-665X/aad81d
17. [17] M. W. Shafer, H. P. Feigenbaum, and D. R. Higueras-Ruiz, “A novel biomimetic torsional actuator design using twisted polymer actuators,” Smart Materials, Adaptive Structures and Intelligent Systems, Vol.1, Article No.V001T06A006, 2017. https://doi.org/10.1115/SMASIS2017-3803
18. [18] D. R. Higueras-Ruiz, H. P. Feigenbaum, and M. W. Shafer, “Moisture’s significant impact on twisted polymer actuation,” Smart Materials and Structures, Vol.29, No.12, Article No.125009, 2020. https://doi.org/10.1088/1361-665X/abc061
19. [19] D. R. Higueras-Ruiz, C. J. Center, H. P. Feigenbaum, A. M. Swartz, and M. W. Shafer, “Finite element analysis of straight twisted polymer actuators using precursor properties,” Smart Materials and Structures, Vol.30, No.2, Article No.025005, 2021. https://doi.org/10.1088/1361-665X/abcaad
20. [20] Q. Yang and G. Li, “A top-down multi-scale modeling for actuation response of polymeric artificial muscles,” J. of the Mechanics and Physics of Solids, Vol.92, pp. 237-259, 2016. https://doi.org/10.1016/j.jmps.2016.04.007
21. [21] C. Wu and W. Zheng, “A modeling of twisted and coiled polymer artificial muscles based on elastic rod theory,” Actuators, Vol.9, No.2, Article No.25, 2020. https://doi.org/10.3390/ACT9020025
22. [22] T. Tanaka, I. Matsuura, and Y. Kato, “Development of woven fabric using actuator fiber,” Research Report of Aichi Industrial Science and Technology Research Centre, pp. 76-79, 2019 (in Japanese).
23. [23] A. N. Semochkin, “A device for producing artificial muscles from nylon fishing line with a heater wire,” 2016 IEEE Int. Symp. on Assembly and Manufacturing (ISAM 2016), pp. 26-30, 2016. https://doi.org/10.1109/ISAM.2016.7750715
24. [24] Y. Tamura, M. Nakabayashi, R. Yoshinaga, M. Ishibashi, and S. Shimawaki, “Establishment and performance evaluation of a stable manufacturing method for fishing line type artificial muscle,” Proc. of the 62nd Graduation Research Conf. of the Kanto Student Association, Vol.143, 2023 (in Japanese).
25. [25] Y. Tamura, A. Mikuni, and M. Nakabayashi, “Development of a composite twisted and coiled polymer actuator unit based on biological muscle and its automatic performance evaluation system,” Proc. of the 2024 JSME Conf. on Robotics and Mechatronics (ROBOMECH), Article No.2P1-I04, 2024 (in Japanese). https://doi.org/10.1299/jsmermd.2024.2P1-I04
26. [26] H. Yin, J. Zhou, J. Li, and V. S. Joseph, “Fabrication and properties of composite artificial muscles based on nylon and a shape memory alloy,” J. of Materials Engineering and Performance, Vol.27, No.7, pp. 3581-3589, 2018. https://doi.org/10.1007/s11665-018-3434-3
27. [27] M. C. Yip and G. Niemeyer, “On the control and properties of supercoiled polymer artificial muscles,” IEEE Trans. on Robotics, Vol.33, No.3, pp. 689-699, 2017. https://doi.org/10.1109/TRO.2017.2664885
28. [28] P. Singh Matharu, Y. Song, U. Gandhi, and Y. Tadesse, “Multi-layered morphing soft structure with high-performance embedded electrothermal artificial muscles along with touch and temperature sensors,” Smart Materials and Structures, Vol.33, No.11, Article No.115049, 2024. https://doi.org/10.1088/1361-665X/ad85b5
29. [29] M. Hiraoka, K. Nakamura, H. Arase, K. Asai, Y. Kaneko, S. W. John, K. Tagashira, and A. Omote, “Power-efficient low-temperature woven coiled fibre actuator for wearable applications,” Scientific Reports, Vol.6, Article No.36358, 2016. https://doi.org/10.1038/srep36358
30. [30] A. Simeonov, T. Henderson, Z. Lan, G. Sundar, A. Factor, J. Zhang, and M. Yip, “Bundled super-coiled polymer artificial muscles: Design, characterization, and modeling,” IEEE Robotics and Automation Letters, Vol.3, No.3, pp. 1671-1678, 2018. https://doi.org/10.1109/LRA.2018.2801469
31. [31] T. H. Weerakkody, M. Hammond, J. H. Neilan, V. Cichella, and C. Lamuta, “Modeling and control of twisted and coiled artificial muscles for soft robotics,” Meccanica, Vol.58, No.4, pp. 643-658, 2023. https://doi.org/10.1007/s11012-023-01651-8
32. [32] Y. Tamura, M. Nakabayashi, and A. Mikuni, “Performance enhancement and thermal characterization of bidirectional twisted and coiled polymer actuators (TCPA) using conductive fibers,” Proc. of the 35th Bio-Frontier Conf., Japan Society of Mechanical Engineers, Article No.1D04, 2024 (in Japanese). https://doi.org/10.1299/jsmebiofro.2024.35.1D04
33. [33] Y. Han, Y. Li, J. Wang, and S. Zhu, “Parallel-stranded spiral structure of artificial muscle based on polyethylene fiber and silver-plated nylon wire,” Fibers and Polymers, Vol.25, No.8, pp. 3151-3163, 2024. https://doi.org/10.1007/s12221-024-00632-2
34. [34] C. Wu, Z. Zhang, and W. Zheng, “A twisted and coiled polymer artificial muscles driven soft crawling robot based on enhanced antagonistic configuration,” Machines, Vol.10, No.2, Article No.142, 2022. https://doi.org/10.3390/machines10020142
35. [35] P. S. Matharu, P. Gong, K. P. R. Guntaka, Y. Almubarak, Y. Jin, and Y. T. Tadesse, “Jelly-Z: Swimming performance and analysis of twisted and coiled polymer (TCP) actuated jellyfish soft robot,” Scientific Reports, Vol.13, Article No.11086, 2023. https://doi.org/10.1038/s41598-023-37611-1