JRM Vol.13 No.3 pp. 245-253
doi: 10.20965/jrm.2001.p0245


Structural Analysis of a Universal Holding Mechanism for Piston Rings

Takao Higashimachi*, Takahide Nakayama**, Takenori Hirakawa** and Hisato Sasahara***

*Kumamoto Technology and Industry Foundation, Applied Electronics Research Center, 2081-10, Tabaru, Mashiki-machi, Kamimasiki-gun, Kumamoto 861-2202, Japan

**Hirata Corporation, 111 Hitotsugi, Ueki, Kamoto, Kumamoto 861-0198 Japan

***Yamax Corporation, 9-5, Suizenji 3-Chome, Kumamoto City, Kumamoto 862-0950, Japan

December 26, 2000
February 2, 2001
June 20, 2001
automobile engine, piston, piston ring, automatic assembly, finite element method, structural analysis, nonlinear problem
By fixing pistons of different diameters with 6 gripping nails, we clarified deformation of piston rings and stress during tightening by simulation based on the finite element method (FEM) as part of development of a universal holding mechanism to insert it into the cylinder block automatically. Nonlinear FEM was used to analyze slidingat contact parts between the ring and the gripping nail when fastening the piston ring. Final defohnation of the piston ring and stress on different parts were verified in detail. We confirmed that insertion of the piston by this method is possible.
Cite this article as:
T. Higashimachi, T. Nakayama, T. Hirakawa, and H. Sasahara, “Structural Analysis of a Universal Holding Mechanism for Piston Rings,” J. Robot. Mechatron., Vol.13 No.3, pp. 245-253, 2001.
Data files:

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jul. 19, 2024