Development Report:
Views over last 60 days: 368
Automation of Chamfering by an Industrial Robot; Development of a System with Reference to Tool Application Direction
Naoki Asakawa*, Yoshio Mizumoto**, and Yoshimi Takeuchi**
*Department of Human and Mechanical Systems Eng., Faculty of Engineering, Kanazawa University, 2-40-20, Kodatsuno, Kanazawa-shi, Ishikawa, 920-8667, Japan
**Department of Mechanical Eng. and Intelligent Systems, University of Electro-Communications, 1-4-1 Chofugaoka, Chofu-shi, Tokyo, 182-8585, Japan
Received:November 2, 2000Accepted:December 1, 2000Published:February 20, 2001
Keywords:CAD, CAM, chamfering, free curved surface, industrial robot
Abstract
The study deals with the automatic chamfering for a workpiece with complex shape on the basis of CAD data, using an industrial robot. Tool path, pushing direction and force at the each chamfering point are calculated from CAD data both to keep chamfering conditions stable and to keep a larger range in space by use of a developed system, named TADRPECS, for workpieces with complex shape. As a chamfering tool, a rotary-bar type tool consisting of a force sensor and two linear actuators are mounted to the arm of an articulated robot. From experimental results, the system is found to be effective to chamfer edges of a hole on a workpiece with free curved surface.
Cite this article as:N. Asakawa, Y. Mizumoto, and Y. Takeuchi, “Automation of Chamfering by an Industrial Robot; Development of a System with Reference to Tool Application Direction,” J. Robot. Mechatron., Vol.13 No.1, pp. 30-35, 2001.Data files:
Copyright© 2001 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.
