Paper:
Views over last 60 days: 618
Development of Pneumatic Rotary Soft Actuator Made of Silicone Rubber
Toshiro Noritsugu, Mitsuhiko Kubota, and Sadaharu Yoshimatsu
Department of Systems Engineering, Okayama University 3-1-1 Tsushimanaka, Okayama, 700-8530 Japan
Received:October 20, 2000Accepted:December 1, 2000Published:February 20, 2001
Keywords:pneumatics, robotics, actuator, rotary soft actuator, silicone rubber
Abstract
A soft actuator with inherent flexibility has been required to built up a soft mechanical drive system such as a human beings collaboration robot and a welfare machine. In this study, a rotary type soft actuator made of silicone rubber driven with compressed air has been developed. This actuator can realize the desired rotary operation by using the fiber reinforcement and the partial difference of stiffness owing to the rubber thickness. In this paper, the structure and operational principle of the actuator is described, and the fundamental properties of actuator are experimentally investigated. The experimental results show that the actuator has the sufficiently large operational angle and the dynamic characteristics of a damping and elasticity component. Its application to a soft robot finger and a robot hand are discussed. Owing to the flexibility of actuator, this hand can grasp unshaped or flexible objects without any complicated control algorithm. The availability of this actuator is confirmed through some experiments.
Cite this article as:T. Noritsugu, M. Kubota, and S. Yoshimatsu, “Development of Pneumatic Rotary Soft Actuator Made of Silicone Rubber,” J. Robot. Mechatron., Vol.13 No.1, pp. 17-22, 2001.Data files:
Copyright© 2001 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.
