Paper:
Views over last 60 days: 414
Sketching for Porcelain Using Image Processing
Kazuhiko Shiranita, Kenichiro Hayashi and Akifumi Otsubo
Applied Electronics Division, Saga Prefectural Industrial Technology Center, 114 Yaemizo, Nabeshima, Saga 849-0932, Japan
Received:July 3, 1998Accepted:October 1, 1998Published:December 20, 1998
Keywords:Image Processing, Three-Dimensional Measurement, Slit-Light Method, Sketching System, CAD System, Numerical Control, Porcelain
Abstract
We developed a system for automatically sketching patterns on the surface of porcelain. The system consists of two parts - measurement for the three-dimensional (3-D) porcelain piece using slit lighting and automatic pattern sketching. Since we classified porcelain pieces into two types by shape, two 3-D measurements were developed. We propose calculating of 3-D coordinates simply and quickly. Sketching uses numerical control. Numerical control data for sketching patterns onto porcelain were generated using results measured by the measurement and CAD systems. Experimental results verified the system's effectiveness.
Cite this article as:K. Shiranita, K. Hayashi, and A. Otsubo, “Sketching for Porcelain Using Image Processing,” J. Robot. Mechatron., Vol.10 No.6, pp. 515-520, 1998.Data files: