single-rb.php

JRM Vol.7 No.5 pp. 389-396
doi: 10.20965/jrm.1995.p0389
(1995)

Paper:

Maneuverability of Control in Passing Over a Reducer and Pipeline Diagnostic Results of Mark V Robot with Lazy Tongs Mechanism

Hidemi Hosokai*, Fumio Hara**, Yasuyuki Uchida***,
Yasunori Abe****, Koetsu Tanaka****, and Yoshio Tanaka****

*Science University of Tokyo, Suwa College, Toyohira 5000-1, Chino, Nagano Pref., 391-02 Japan

**Faculty of Engineering, Science University of Tokyo, Kagurazaka 1-3, Shinjuku, Tokyo, 162 Japan

***Japan Defence Agency, Fuchinobe 2-9-54, Sagamihara, Kanagawa Pref., 229 Japan

****Shinryo Corp., Wadai 41, Tsukuba, lbaraki, 300-42 Japan

Received:
July 24, 1995
Accepted:
August 10, 1995
Published:
October 20, 1995
Keywords:
Robotics, Pipeline maintenance robot, lazy tongs mechanism, Reducer, Pipeline diagnosis, Corrosion
Abstract
This paper deals with a control method for a newly designed module-type robot with lazy tongs mechanism, with the experimental results of passing over a reducer, and with the diagnostic results of the Mark V robot with the lazy tongs mechanism. This module-type robot has been newly designed for inspection of pipelines, such as ones for air conditioners and water pipes, in buildings. This robot can recognize reducers by means of a newly designed sensor and can pass over reducers automatically without requirements for changing any part of the robot. Passing the reducers and changes in thickness of pipelines caused by corrosion are shown in experimental results.
Cite this article as:
H. Hosokai, F. Hara, Y. Uchida, Y. Abe, K. Tanaka, and Y. Tanaka, “Maneuverability of Control in Passing Over a Reducer and Pipeline Diagnostic Results of Mark V Robot with Lazy Tongs Mechanism,” J. Robot. Mechatron., Vol.7 No.5, pp. 389-396, 1995.
Data files:

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Nov. 04, 2024