Paper:
Views over last 60 days: 385
Human-Friendly Operating System for Hyper-Environments
Mamoru Mitsuishi*, Shin’ichi Warisawa*, Yotaro Hatamura*,
Takaaki Nagao* and Bruce Kramer**
*Department of Engineering Synthesis, Faculty of Engineering, The University of Tokyo, 3-1, Hongo 7-chome, Bunkyo-ku, Tokyo 113, Japan
**Department of Civil, Mechanical and Environmental Engineering, The George Washington University Washington D.C., 20052, U.S.A.
Received:December 20, 1991Accepted:January 15, 1992Published:April 20, 1992
Keywords:human friendly manufacturing system, micro handling system, reality communication, force-auditory information transformation, machining state judge method
Abstract
This paper describes a manufacturing system that allows the natural manipulation of tools of production and raw material in environments which cannot be accessed directly by normal human senses. Examples of such environments may be remote locations, the micrometer world or outer space. In the context of the paper, the term “hyper-environment” connotes such an environment. The paper discusses the functions which are necessary to realize the system, the software and hardware which are employed in the system and the “reality communication” techniques which are needed to allow the remote human operator to effectively monitor the manufacturing operation. A focus of the paper is a technique for transforming cutting force information into auditory information that allows the operator to determine the cutting conditions. Furthermore, a technique which was employed for judging the machining state from force data, which significantly reduces the amount of data which must be communicated to determine the cutting state, is discussed. Tests in which a machining center in Tokyo was controlled by teleoperators in Washington are described.
Cite this article as:M. Mitsuishi, S. Warisawa, Y. Hatamura, T. Nagao, and B. Kramer, “Human-Friendly Operating System for Hyper-Environments,” J. Robot. Mechatron., Vol.4 No.2, pp. 167-178, 1992.Data files: