Paper:
Views over last 60 days: 337
Design of an Actuator for Tele-existence Display of Position and Force to Human Hand and Elbow
Shuichi Ino, Takashi Izumi, Makoto Takahashi and Tohru Ifukube
Research Institute of Applied Electricity, Hokkaido University, Kita 12-jou Nishi 6-chome, Kita-ku, Sapporo, Hokkaido 060, Japan
Received:January 10, 1992Accepted:January 21, 1992Published:February 20, 1992
Keywords:Master-slave robot hand with Sensory Feedback, Hydrogen absorbing alloys, Metal hydride actuator, Tele-existence robot, Virtual reality, Functional prehension/elbow orthosis
Abstract
We have been studying on a tele-existence robot hand based on the psychophysical analysis of the tactile information processing. This report proposes an actuator to get a feedback of the position and the force from the robot hand to the human hand. The actuator consists of metal hydrides (MH) covered with copper, Peltier elements to heat or cool the MH and a cylinder with metal bellows. The response characteristics of this actuator were investigated from a point of view of the practical use. The actuator was found to be suitable for the teleexistence hand because it may work without noise, may smoothly attach to the human hand and may be easily controlled by a microprocessor.
Cite this article as:S. Ino, T. Izumi, M. Takahashi, and T. Ifukube, “Design of an Actuator for Tele-existence Display of Position and Force to Human Hand and Elbow,” J. Robot. Mechatron., Vol.4 No.1, pp. 43-48, 1992.Data files:
