Additive Manufacturing in the Context of Hybrid Flexible Manufacturing Systems

Johan Potgieter; Olaf Diegel; Frazer Noble; Martin Pike

doi:10.20965/ijat.2012.p0627

single-au.php

« previous

IJAT Vol.6 No.5 pp. 627-632

doi: 10.20965/ijat.2012.p0627

(2012)

Review:

Views over last 60 days: 963

Additive Manufacturing in the Context of Hybrid Flexible Manufacturing Systems

Johan Potgieter, Olaf Diegel, Frazer Noble, and Martin Pike

School of Engineering and Advanced Technology, Massey University, Building 106, Gate 4, Albany Highway, Albany, Auckland, New Zealand

Received:

April 3, 2012

Accepted:

August 7, 2012

Published:

September 5, 2012

Keywords:

additive manufacturing, rapid prototyping, flexible manufacturing systems

Abstract

This paper examines additive manufacturing technologies in the context of their potential use in flexible manufacturing systems. It reviews which current technologies are capable of producing full-strength production parts. It also examines which technologies might be applicable to FMS and how they might be implemented as part of a hybrid manufacturing cell.

Cite this article as:

J. Potgieter, O. Diegel, F. Noble, and M. Pike, “Additive Manufacturing in the Context of Hybrid Flexible Manufacturing Systems,” Int. J. Automation Technol., Vol.6 No.5, pp. 627-632, 2012.

Data files:

References

[1] M. P. Groover, “Automation, production systems, and computerintegrated manufacturing,” Pearson Education, NY, ISBN 0-13-239321-2, 2007.
[2] T. Wohlers, “Wohlers Report 2006, Worldwide progress report on the rapid prototyping, tooling, and manufacturing state of the industry,” Wohlers Associates, ISBN 0-9754429-3-7, 2006.
[3] Ian Gibson, David W. Rosen, and Brent Stucker, “Additive Manufacturing Technologies; Rapid Prototyping to Direct Digital Manufacturing,” Springer, ISBN: 978-1-4419-1119-3, January, 2010.
[4] “Stratasys,” USA,
http://www.fortus.com/Fused Deposition Modeling Technology.aspx
[accessed December 2010]
[5] “3D Systems,” USA,
http://www.3dsystems.com/products/sla/tour/movtest.asp
[accessed December 2010]
[6] “Objet,” Israel,
http://www.objet.com/PRODUCTS/PolyJet_Technology/
[accessed December 2010]
[7] “EOS,” Electro Optical Systems, Germany, 2011,
http://www.eos.info/fileadmin/user_upload/downloads_presse/pdf_files/EOS_Technology_EN.pdf
[accessed December 2011]
[8] T. Tolio, “Design of Flexible Production Systems – Methodologies and Tools,” Berlin, Springer, ISBN 978-3-540-85413-5, 2009.
[9] G. Chryssolouris, “Manufacturing Systems – Theory and Practice,” New York, NY: Springer Verlag, 2^nd edition, 2005.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] M. P. Groover, “Automation, production systems, and computerintegrated manufacturing,” Pearson Education, NY, ISBN 0-13-239321-2, 2007.

[2] [2] T. Wohlers, “Wohlers Report 2006, Worldwide progress report on the rapid prototyping, tooling, and manufacturing state of the industry,” Wohlers Associates, ISBN 0-9754429-3-7, 2006.

[3] [3] Ian Gibson, David W. Rosen, and Brent Stucker, “Additive Manufacturing Technologies; Rapid Prototyping to Direct Digital Manufacturing,” Springer, ISBN: 978-1-4419-1119-3, January, 2010.

[4] [4] “Stratasys,” USA,
http://www.fortus.com/Fused Deposition Modeling Technology.aspx
[accessed December 2010]

[5] [5] “3D Systems,” USA,
http://www.3dsystems.com/products/sla/tour/movtest.asp
[accessed December 2010]

[6] [6] “Objet,” Israel,
http://www.objet.com/PRODUCTS/PolyJet_Technology/
[accessed December 2010]

[7] [7] “EOS,” Electro Optical Systems, Germany, 2011,
http://www.eos.info/fileadmin/user_upload/downloads_presse/pdf_files/EOS_Technology_EN.pdf
[accessed December 2011]

[8] [8] T. Tolio, “Design of Flexible Production Systems – Methodologies and Tools,” Berlin, Springer, ISBN 978-3-540-85413-5, 2009.

[9] [9] G. Chryssolouris, “Manufacturing Systems – Theory and Practice,” New York, NY: Springer Verlag, 2^nd edition, 2005.