IJAT Vol.16 No.6 pp. 814-823
doi: 10.20965/ijat.2022.p0814


Sustainable Design Implementation – Measuring Environmental Impact and User Responsibility

Achmad Yahya Teguh Panuju*,†, Martinus Martinus*, Akhmad Riszal*, and Hideki Kobayashi**

*Department of Mechanical Engineering, Universitas Lampung
Sumantri Brojonegoro Street No.1, Bandar Lampung 35145, Indonesia

Corresponding author

**Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, Suita, Japan

April 28, 2022
July 11, 2022
November 5, 2022
sustainable design, eco awareness, environmental impact measurement

Sustainable design in product development has multiple roles in addressing an increased level of sustainability. This includes reducing resource consumption and modifying user behaviors to become more eco-friendly. However, these functions are typically assessed separately, despite a proposed mutual correlation. This paper proposes a framework for defining this correlation. By using the correlated functions in parallel, one can enhance the product development process, and this will strengthen the use of sustainable design as a powerful design tool for future products. A practical approach for implementation is needed, which should show the benefit of the design both from the environmental aspect and a change in the responsibility of users. The primary goal of this manuscript is to propose an approach to fill this gap, using experiments to explore the effect of a washing machine modification project in Indonesia. Resource consumption while doing the laundry is measured as a representation of the environmental impact, while the users’ predisposition for environmental responsibility inclination is analyzed by scaling the responsibility. The results show that the sustainable design strategy is effective in reducing the environmental impact, while simultaneously increasing the environmental responsibility of users. Further study is required to define the correlation between the measured factors to formulate a well-developed theory related to this correlation.

Cite this article as:
A. Panuju, M. Martinus, A. Riszal, and H. Kobayashi, “Sustainable Design Implementation – Measuring Environmental Impact and User Responsibility,” Int. J. Automation Technol., Vol.16 No.6, pp. 814-823, 2022.
Data files:
  1. [1] T. Bhamra and R. J. Hernandez, “Thirty years of design for sustainability: an evolution of research, policy and practice,” Des. Sci., Vol.7, e2, 2021.
  2. [2] S. Kauppi, I. N. Pettersen, and C. Boks, “Consumer acceptance of edible insects and design interventions as adoption strategy,” Int. J. of Food Design, Vol.4, No.1, pp. 39-62, 2019.
  3. [3] I. Ghazali, S. H. Abdul Rashid, S. Z. Md Dawal, H. Aoyama, A. E. Tontowi, and R. A. R. Ghazilla, “Green product preferences with respect to cultural influences: empirical study in Indonesia,” Int. J. Automation Technol., Vol.12, No.6, pp. 842-852, 2018.
  4. [4] A. Mayyas, M. Omar, M. Hayajneh, and A. R. Mayyas, “Vehicle’s lightweight design vs electrification from life cycle assessment perspective,” J. of Cleaner Production, Vol.167, pp. 687-701, 2017.
  5. [5] A. Hamni, A. Y. T. Panuju, and D. A. S. Ambarwati, “Understanding consumer’s behavior for reducing environmental and social impact through sustainable product design – a study case of vehicle usages in Indonesia,” IOP Conf. Ser.: Earth and Env. Sci., Vol.739, 2021.
  6. [6] T. Bhamra, T. Tang, and D. Lilley, “Design for sustainable behaviour: using products to change consumer behaviour,” The Design J., Vol.14, No.4, pp. 427-445, 2011.
  7. [7] J. Daae and C. Boks, “A classification of user research methods for design for sustainable behaviour,” J. of Cleaner Production, Vol.106, pp. 680-689, 2015.
  8. [8] E. Kunii, T. Matsuura, S. Fukushige, and Y. Umeda, “Proposal of consistency management method between product and its life cycle design,” Int. J. Automation Technol., Vol.6, No.3, pp. 272-278, 2012.
  9. [9] M. Fargnoli, “Design process optimization for ecodesign,” Int. J. Automation Technol., Vol.3, No.1, pp. 33-39, 2009.
  10. [10] P. Ghisellini, C. Cialani, and S. Ulgiati, “A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems,” J. of Cleaner Production, Vol.114, pp. 11-32, 2016.
  11. [11] G. Latupeirissa and D. Adhariani, “External and internal economic impacts of eco-innovation and the role of political connections: a sustainability narrative from an emerging market,” J. of Cleaner Production, Vol.258, 120579, 2020.
  12. [12] K. Fujimoto, S. Fukushige, and H. Kobayashi, “Data assimilation mechanism for lifecycle simulation focusing on process behaviors,” Int. J. Automation Technol., Vol.14, No.6, pp. 882-889, 2020.
  13. [13] M. Ham, D. Mrčela, and M. Horvat, “Insights for measuring environmental awareness,” Econviews, Vol.29, No.1, pp. 159-176, 2016.
  14. [14] K. M. R. Taufique, C. B. Siwar, B. A. Talib, and N. Chamhuri, “Measuring consumers’ environmental responsibility: a synthesis of constructs and measurementscale items,” Current World Environment, Vol.9, No.1, pp. 27-36, 2014.
  15. [15] H. Mahat, M. Hashim, N. Nayan, S. B. Norkhaidi, and Y. Saleh, “Development of environmental awareness measurement instruments through education for sustainable development,” Proc. of the 8th UPI-UPSI Int. Conf. 2018 (UPI-UPSI 2018), pp. 73-86, 2019.
  16. [16] S. M. Crus and B. Manata, “Measurement of environmental concern: a review and analysis,” Front. Psychol., Vol.11, 363, 2020.
  17. [17] CLASP, “Indonesia Residential End Use Survey,” p. 193, 2020. [Accessed December 20, 2021]
  18. [18] J. C. Tu, Y. Nagari, and M. Shih, “Establishing design strategies and an assessment tool of home appliances to promote sustainable behavior for the new poor,” Sustainability, Vol.10, No.5, 1507, 2018.
  19. [19] A. Y. T. Panuju, D. A. S. Ambarwati, and M. D. Susila, “Implications of automotive product sustainability on young customers’ purchase intention in developing countries: An experimental approach,” IOP Conf. Ser.: Mater. Sci. Eng., Vol.857, 012024, 2020.
  20. [20] H. Kobayashi, S. Fukushige, and H. Murata, “A framework for locally-oriented product design using extended function-structure analysis and mixed prototyping,” Global Environment Research, Vol.25, pp. 43-50, 2021.
  21. [21] A. Bearth, L. Miesler, and M. Siegrist, “Consumers’ risk perception of household cleaning and washing products,” Risk Analysis, Vol.37, No.4, pp. 647-660, 2016.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 19, 2024