IJAT Vol.16 No.6 pp. 727-736
doi: 10.20965/ijat.2022.p0727


Variability Specific to a Closed-Loop Supply Chain with Product Deterioration

Jundai Koketsu*, Aya Ishigaki*,†, Hiromasa Ijuin**, and Tetsuo Yamada**

*Tokyo University of Science
2641 Yamazaki, Noda, Chiba 278-8510, Japan

Corresponding author

**The University of Electro-Communications, Chofu, Japan

March 24, 2022
August 8, 2022
November 5, 2022
supply chain management, remanufacturing, qualitative uncertainty, simulation

Environmental issues and increasing global demand have led to calls for sustainable production and consumption. Products deemed insufficiently environmentally friendly are beginning to be removed from the market, and manufacturers must achieve social responsibility and economic benefits. However, in a conventional linear supply chain, an increase in sales volume directly leads to an increase in waste and resource consumption, resulting in a trade-off between the environment and the economy. Closed-loop supply chains resolve trade-offs, achieve corporate social responsibility, and enhance competitiveness. Closed-loop supply chains must recover used products with a high degree of uncertainty. Uncertainty in the quantity, quality, and timing of used products can cause serious problems such as the bullwhip effect in the dynamic behavior of the supply chain. This study aims to analyze the dynamic impact of used product uncertainty on a closed-loop supply chain and propose ways to deal with it. Products deteriorate with their use and eventually become worthless for recovery and remanufacturing. This study confirms that, even when there is no demand variability and lead time, the uncertainty of used products, especially qualitative uncertainty, causes large variability in the closed-loop supply chain. The results of the numerical example using the model proposed in this study show that the policy of limiting the quantity of remanufacturing can mitigate the variability. Furthermore, the appropriate limits vary depending on the characteristics of the product, such as its lifetime. This suggests the need to control the amount of remanufacturing for the sustainability of the closed-loop supply chain rather than remanufacturing as much as possible, to reduce environmental impact.

Cite this article as:
J. Koketsu, A. Ishigaki, H. Ijuin, and T. Yamada, “Variability Specific to a Closed-Loop Supply Chain with Product Deterioration,” Int. J. Automation Technol., Vol.16 No.6, pp. 727-736, 2022.
Data files:
  1. [1] T. E. T. Dantas, E. D. de-Souza, I. R. Destro, G. Hammes, C. M. T. Rodriguez, and S. R. Soares, “How the combination of Circular Economy and Industry 4.0 can contribute towards achieving the Sustainable Development Goals,” Sustainable Production and Consumption, Vol.26, pp. 213-227,, 2021.
  2. [2] [Accessed January 4, 2022]
  3. [3] M. Tehareni and S. M. Gupta, “Designing a Sustainable Green Closed-Loop Supply Chain under Uncertainty and Various Capacity Levels,” Logistics, Vol.5, No.2, 20, doi: 10.3390/logistics5020020, 2021.
  4. [4] [Accessed January 4, 2022]
  5. [5] A. Murray, “The Circular Economy: An Interdisciplinary Exploration of the concept and Application in a Global Context,” J. of Business Ethics, Vol.140, pp. 369-380, doi: 10.1007/s10551-015-2693-2, 2017.
  6. [6] E. Shekarian, “A review of factors affecting closed-loop spply chain models,” J. of Cleaner Production, Vol.253, 119823, doi: 10.1016/j.jclepro.2019.119823, 2020.
  7. [7] D. Masi, S. Day, and J. Godsell, “Supply Chain Configurations in the Circular Economy: A Systematic Literature Review,” Sustainability, Vol.9, No.9, 1602, doi: 10.3390/su9091602, 2017.
  8. [8] H. Peng, N. Shen, H. Liao, H. Xue, and Q. Wang, “Uncertainty factors, methods, and solutions of closed-loop supply chain — A review for current situation and future prospects,” J. of Cleaner Production, Vol.254, 120032, doi: 10.1016/j.jclepro.2020.120032, 2020.
  9. [9] A. Ishigaki, T. Yamada, and S. M. Gupta, “Design of a Closed-Loop Supply Chain with Stochastic Product Returns,” Int. J. Automation Technol., Vol.11, No.4, pp. 563-571, doi: 10.20965/ijat.2017.p0563, 2017.
  10. [10] A. Okuda, A. Ishigaki, T. Yamada, and S. M. Gupta, “Modeling and Analysis of a Closed-Loop Supply Chain in Consideration of Extra Demand,” Int. J. Automation Technol., Vol.12, No.4, pp. 469-481, doi: 10.20965/ijat.2018.p0469, 2018.
  11. [11] K. Yoda, H. Irie, Y. Kinoshita, T. Yamada, S. Yamada, and M. Inoue, “Remanufacturing Option Selection with Disassembly for Recovery Rate and Profit,” Int. J. Automation Technol., Vol.14, No.6, pp. 930-942, doi: 10.20965/ijat.2020.p0930, 2020.
  12. [12] J. M. Chen and C. I. Chang, “The co-opetitive strategy of a closed-loop supply chain with remanufacturing,” Transportation Research Part E: Logistics and Transportation Review, Vol.48, pp. 387-400, doi: 10.1016/j.tre.2011.10.001, 2012.
  13. [13] E. Van Weelden, R. Mugge, and C. Bakker, “Paving the way towards circular consumption: exploring consumer acceptance of refurbished mobile phones in the Dutch market,” J. of Cleaner Production, Vol.113, pp. 743-754, doi: 10.1016/j.jclepro.2015.11.065, 2016.
  14. [14] X. Wang and S. M. Disney, “The bullwhip effect: Progress, trends and directions,” European J. of Operational Research, Vol.250, pp. 691-701, doi: 10.1016/j.ejor.2015.07.022, 2016.
  15. [15] A. C. Braz, A. M. de Mello, L. A. de Vasconcelos Gomes, and P. T. D. S. Nascimento, “The bullwhip effect in closed-loop supply chains: A systematic literature review,” J. of Cleaner Production, Vol.202, pp. 376-389, doi: 10.1016/j.jclepro.2018.08.042, 2018.
  16. [16] T. E. Goltsos, B. Ponte, S. Wang, Y. Liu, M. M. Naim, and A. A. Syntetos, “The boomerang returns? Accounting for the impact of uncertainties on the dynamics of remanufacturing systems,” Int. J. of Production Research, Vol.57, pp. 7361-7394, doi: 10.1080/00207543.2018.1510191, 2019.
  17. [17] B. Ponte, J. M. Framinan, S. Cannella, and R. Dominguez, “Quantifying the Bullwhip Effect in closed-loop supply chains: The interplay of information transparencies, return rates, and lead times,” Int. J. of Production Economics, Vol.230, doi: 10.1016/j.ijpe.2020.107798, 2020.
  18. [18] H. L. Lee, V. Padmanabhan, and S. Whang, “The Bullwhip Effect in Supply Chains,” MIT Sloan Management Review, Vol.38, No.3, pp. 93-102, 1997.
  19. [19] J. Dejonckheere, S. M. Disney, M. R. Lambrecht, and D. R. Towill, “Measuring and avoiding the bullwhip effect: A control theoretic approach,” European J. of Operational Research, Vol.147, pp. 567-590, doi: 10.1016/S0377-2217(02)00369-7, 2003.
  20. [20] X. Wang and S. M. Disney, “The bullwhip effect: Progress, trends and directions,” European J. of Operational Research, Vol.250, pp. 691-701, doi: 10.1016/j.ejor.2015.07.022, 2016.
  21. [21] Y. Zhao, Y. Cao, H. Li, S. Wang, Y. Liu, Y. Li, and Y. Zhang, “Bullwhip effect mitigation of green supply chain optimization in electronics industry,” J. of Cleaner Production, Vol.180, pp. 888-912, doi: 10.1016/j.jclepro.2018.01.134, 2018.
  22. [22] [Accessed January 17, 2022]

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 03, 2024