single-au.php

IJAT Vol.16 No.2 pp. 126-137
doi: 10.20965/ijat.2022.p0126
(2022)

Paper:

Sensor-Integrated Tool for Self-Optimizing Single-Lip Deep Hole Drilling

Robert Wegert*,†, Mohammad Alaa Alhamede*, Vinzenz Guski**, Siegfried Schmauder**, and Hans-Christian Möhring*

*Institute for Machine Tools (IfW), University of Stuttgart
17 Holzgartenstraße, Stuttgart 70174, Germany

Corresponding author

**Institute for Materials Testing, Materials Science and Strength of Materials (IMWF), University of Stuttgart, Stuttgart, Germany

Received:
July 30, 2021
Accepted:
November 15, 2021
Published:
March 5, 2022
Keywords:
deep hole drilling, temperature, vibrations, sensors, microcontroller
Abstract

Single-lip deep-hole drilling (SLD) is characterized by high surface quality and compressive residual stress in the subsurface of the drill hole. These properties depend significantly on the thermo-mechanical conditions in the machining process. The required subsurface properties can be adjusted in-process via process monitoring and control when the thermo-mechanical conditions are maintained in the optimum range. Herein, a sensor-integrated SLD tool is introduced, which allows the temperatures near the cutting zone to be measured and the vibrations occurring directly at the drill head to be recorded. A microcontroller-based wireless measurement data transmission method is presented.

Cite this article as:
R. Wegert, M. Alhamede, V. Guski, S. Schmauder, and H. Möhring, “Sensor-Integrated Tool for Self-Optimizing Single-Lip Deep Hole Drilling,” Int. J. Automation Technol., Vol.16 No.2, pp. 126-137, 2022.
Data files:
References
  1. [1] D. Biermann, F. Bleicher, U. Heisel, F. Klocke, H.-C. Möhring, and A. Shih, “Deep hole drilling,” CIRP Annals, Vol.67, No.2, pp. 673-694, 2018.
  2. [2] VDI 3210, “Tiefbohrverfahren,” Berlin: Beuth Verlag, 2014.
  3. [3] R. Wegert, V. Guski, S. Schmauder, and H.-C. Möhring, “Effects on surface and peripheral zone during single lip deep hole drilling,” Procedia CIRP, No.87, pp. 113-118, 2020.
  4. [4] R. Schmidt, S. Strodick, F. Walther, D. Biermann, and A. Zabel, “Analysis of the functional properties in the bore sub-surface zone during BTA deep-hole drilling,” Procedia CIRP, Vol.88, pp. 318-323, 2020.
  5. [5] T. Inoue, M. Hagino, K. Tokuno, R. Tsuboi, and K. Somaya, “Machining Temperature and Accuracy of Magnesium Alloy AZ31 with Deep-Hole Small Drilling,” Int. J. Automation Technol., Vol.15, No.4, pp. 448-456, 2021.
  6. [6] R. Wegert, V. Guski, H.-C. Möhring, and S. Schmauder, “Temperature monitoring in the subsurface during single lip deep hole drilling,” tm – Technisches Messen, pp. 757-767, 2020.
  7. [7] H.-C. Möhring, P. Wiederkehr, K. Erkorkmaz, and Y. Kakinuma, “Self-optimizing machining systems,” CIRP Annals, Vol.69, No.2, pp. 740-763, 2020.
  8. [8] H.-C. Möhring, Q. P. Nguyen, A. Kuhlmann, C. Lerez, L. T. Nguyen, and S. Misch, “Intelligent Tools for Predictive Process Control,” Procedia CIRP, Vol.57, pp. 539-544, 2016.
  9. [9] R. Teti, K. Jemielniak, G. O’Donnell, and D. Dornfeld, “Advanced monitoring of machining operations,” CIRP Annals, Vol.59, No.2, pp. 717-739, 2010.
  10. [10] M. Shindou, R. Matsuda, T. Furuki, T. Hirogaki, and E. Aoyama, “Monitoring of End-Mill Temperature with Infrared Thermography and Wireless Tool Holder System,” AMR, Vol.1017, pp. 624-629, 2014.
  11. [11] S. Matsui, N. Ozaki, T. Hirogaki, E. Aoyama, T. Yamamoto, and M. Shindo, “Smart monitoring of helical thread mill process with a wireless tool holder and CNC information,” Advances in Materials and Processing Technologies, pp. 1-13, 2020.
  12. [12] R. Matsuda, M. Shindou, T. Hirogaki, and E. Aoyama, “Monitoring of Rotational Vibration in Tap and Endmill Processes with a Wireless Multifunctional Tool Holder System,” Int. J. Automation Technol., Vol.12, No.6, pp. 876-882, 2018.
  13. [13] S. Boksuwan and T. Benjanarasuth, “Robust Real-Time Model Predictive Control for Torsional Vibration System,” Int. J. Automation Technol., Vol.6, No.3, pp. 345-353, 2012.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Dec. 06, 2024