Development of Curvature Gap Estimation System for Deciding Thermal Forming Instructions of Ship Curved Shell Plates Using Laser Scanner
Kazuo Hiekata*,†, Taiga Mitsuyuki**, Kota Okada*, and Yoshiyuki Furukawa***
*Graduate School of Frontier Science, The University of Tokyo
5-1-5 Kashiwano-ha, Kashiwa, Chiba 277-8563, Japan
**Graduate School of Engineering, Yokohama National University
***National Institute of Advanced Industrial Science and Technology
A thick steel plate with a unique curvature was employed to make the outer shell of a ship. This curved shell plate is shaped one at a time by craftsmen carrying out plastic deformation using gas heating. The process includes evaluation of forming accuracy and selection of thermal forming instructions. Both are done using fitting molds called “wooden templates” in a manner that is qualitative but dependent on individual skills. Thus, there is a problem of variation in quality. To solve the problem, research and development have been promoted on a manufacturing process assisted by a laser scanner that is a highly accurate three-dimensional measuring device. An evaluation method for forming accuracy has been established and has reached a satisfactory level for operation on site. However, the method of automatic selection of thermal forming instructions is still immature. Focusing on the curvature of frame lines on the outer plate that acts as an index when instructions for thermal forming are decided upon, a curvature gap estimation system was developed for outer plate frame lines using a laser scanner. Here, a frame line refers to the standard to be compared with a design shape to evaluate the forming accuracy of the members. The system extracts from measured data a point cloud that makes up each frame line, calculates curvature at a given point on the frame line, and visualizes it with a graph and a color map. This system uses an evaluation method whose curvature calculation has sufficiently appropriate accuracy and that is feasible and useful on site. First, the sufficiently appropriate accuracy of the curvature calculation was confirmed using a measurement form of a cylindrical model that simulated a gap between the distance direction generated by measurement with the laser scanner and the direction of laser irradiation. Next, the feasibility and usefulness on site were confirmed by applying the measurement method to the processing data of the ship shell outer plate shape that was obtained through the curving process in the shipyard, and then by comparing the record of regions thermally formed by the worker with index calculation results made by the system.
-  R. L. Storch, C. P. Hammon, H. Bunch, and R. C. Moore, “Ship Production,” 2nd Edition, Cornel Maritime Press, 1995.
-  S. J. Gye, C. Ryu, and N. J. Ho, “A comprehensive line-heating algorithm for automatic formation of curved shell plates,” J. of Ship Production, Vol.20, No.2, pp. 69-78, 2004.
-  J. Shin and C. Ryu, “Nonlinear kinematic analysis of deformation of plates for ship hull fabrication,” J. of Ship Research, Vol.44, No.4, pp. 270-277, 2000.
-  J. Cheng and Y. L. Yao, “Process design of laser forming for three-dimensional thin plates,” J. of Manufacturing Science and Engineering, Vol.126, No.2, pp. 217-225, 2004.
-  C. Ryu and K. S. Kim, “Advanced and automatic determination of initial configuration of curved shell plates for flame bending,” J. of Materials Processing Technology, Vol.203, pp. 232-240, 2008.
-  Y. Tango, M. Ishiyama, and H. Suzuki, “IHIMU-α a fully automated steel plate bending system for shipbuilding,” IHI Engineering Review, Vol.44, No.1, pp. 6-11, 2011.
-  J. Park, D. Kim, S. Mun, K. Kwon, J. Lee, and K. H. Ko, “Automated thermal forming of curved plates in shipbuilding: system development and validation,” Int. J. Computer Integrated Manufacturing, Vol.29, pp. 1128-1145, 2016.
-  J. Park, D. Kim, C. Hyun, J. Shin, and K. H. Ko, “Thermal forming automation system for curved hull plates in shipbuilding: analysis and design,” Int. J. Computer Integrated Manufacturing, Vol.29, pp. 287-297, 2016.
-  K. Hiekata, H. Yamato, M. Enomoto, Y. Oida, Y. Furukawa, Y. Makino, and T. Sugihiro, “Development and case studuies of accuracy evaluation system for curved shell plates by laser scanner,” J. of Ship Production and Design, Vol.27, No.2, pp. 84-90, 2011.
-  R. Miyazaki, M. Yamamoto, and K. Harada, “Line-based planar structure extraction from a point cloud with an anisotropic distribution,” Int. J. Automation Technol., Vol.11, No.4, pp. 657-665, 2017.
-  H. Masuda, T. Niwa, I. Tanaka, and R. Matsuoka, “Reconstruction of polygonal faces from large-scale point-clouds of engineering plants,” Comupter-Aided Design and Application, Vol.12, No.5, pp. 555-563, 2015.
-  T. Watanabe, T. Niwa, and H. Masuda, “Registration of point-clouds from terrestrial and portable laser scanners,” Int. J. Automation Technol., Vol.10, No.2, pp. 163-171, 2016.
-  J. Sun, K. Hiekata, H. Yamato, N. Nakagaki, and A. Sugawara, “Development of software system for generating curved shell plate’s processing plan using virtual templates,” Int. Conf. on Computer Applications in Shipbuilding, Vol.2, pp. 131-138, 2013.
-  J. Sun, K. Hiekata, H. Yamato, N. Nakagaki, and A. Sugawara, “Virtualization and automation for knowledge extraction in curved shell plates’ machining plan design process,” Int. J. Agile Systems and Management, Vol.7, pp. 282-303, 2014.
-  M. Gross and H. Pfister, “Point-based Graphics,” Morgan Kaufmann Publishers, 2007.
-  J. S. Beis and D. G. Lowe, “Shape indexing using approximate nearest-neighbour search in high-dimensional spaces,” Proc. of the 1997 Conf. on Computer Vision and Pattern Recognition, pp. 1000-1006, 1997.
-  J. Sun, K. Hiekata, H. Yamato, N. Nakagaki, and A. Sugawara, “Efficient point cloud data processing in shipbuilding: Reformative component extraction method and registration method,” J. of Computational Design and Engineering, Vol.1, Issue 3, pp. 202-212, 2014.
This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.