IJAT Vol.6 No.2 p. 109
doi: 10.20965/ijat.2012.p0109


Special Issue on Machine Tool Evaluation

Atsushi Matsubara

March 5, 2012
With machine tools evolving with the hardware and control whose dramatic advances are expanding the field, requirements for performance have grown tougher. These have made it more complicated to design, produce, and maintain machine tool systems. This has also ensured that performance evaluation and prediction technology play an increasingly important and active role in these areas. This special issue on machine tool evaluation should prove especially interesting to researchers and engineers engaged in the enhancement of accuracy, efficiency, and versatility in machine tool systems, including the important disciplines of tooling and cutting tools. The topics that are covered in this special issue include – but are not limited to – the metrology of machine tools, the identification of kinematic errors through machine tool geometry, the evaluation of thermal deformation, the dynamic analysis of machine tools, the evaluation of spindle stiffness, and cutting-edge monitoring technology. All of these provide advanced knowledge concerning that state-of-the-art of technology required to ensure that machine tool design continues to remain innovative. I would like to close here by expressing my sincere appreciation to all those who have worked to make this issue interesting and informative. My special thanks go to the authors of the featured articles and to the reviewers whose invaluable efforts have made this publication possible.
Cite this article as:
A. Matsubara, “Special Issue on Machine Tool Evaluation,” Int. J. Automation Technol., Vol.6 No.2, p. 109, 2012.
Data files:

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Jun. 07, 2023