Top > JDR > Design Standard of Control Structures Against Debris Flow in J ...

single-dr.php

JDR Vol.5 No.3 pp. 307-314
(2010)
doi: 10.20965/jdr.2010.p0307

Paper:

Views over last 60 days: 690

Design Standard of Control Structures Against Debris Flow in Japan

Nobutomo Osanai*, Hideaki Mizuno*, and Takahisa Mizuyama**

*Erosion and Sediment Control Division, Research Center for Disaster Risk Management, National Institute for Land and Infrastructure Management, Ministry of Land, Infrastructure, Transport and Tourism, Japan, Tsukuba, Ibaraki 305-0804, Japan

**Graduate School of Agriculture, Kyoto University, Oiwake-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8502, Japan

Received:
January 6, 2010
Accepted:
April 23, 2010
Published:
June 1, 2010
Creative Commons License
Keywords:
sediment hazard, countermeasures, structural measures, nonstructural measures, technical standard for debris flow control
Abstract
Countermeasures to prevent or mitigate sedimentrelated hazards, debris flow in this paper are classified as structural measures or nonstructural measures. The structural measures are Sabo dams, leading dikes, and channels for debris flow control. The nonstructural measures are the designation of areas prone to debris flow, proper land use in the areas, the reinforcement of houses, the creation of warning systems and the evacuation of the inhabitants in case of emergency. A technical standard on debris flow control structures of Japan was revised in 2007. Major revision is that check dams called Sabo dams constructed near houses are changed from closed type Sabo dams to open type Sabo dams because the occurrence frequency is low as once for longer than one hundred years, natural torrent environment should be conserved in ordinary days and sediment trap capacity should be kept until debris flow occurs. Points changed are explained such as the opening of open type dams is as equal as the maximum stone size.
Cite this article as:
N. Osanai, H. Mizuno, and T. Mizuyama, “Design Standard of Control Structures Against Debris Flow in Japan,” J. Disaster Res., Vol.5 No.3, pp. 307-314, 2010.
Data files:
References
  1. [1] Erosion and Sediment Control Division, Research Center for Disaster Risk Management, “Manual of Technical Standard for establishing Sabo plan for debris flow and driftwood,” Technical Note of National Institute for Land and Infrastructure Management, No.364, 2007 (in Japanese).
  2. [2] Erosion and Sediment Control Division, Research Center for Disaster Risk Management, “Manual of Technical Standard for designing Sabo facilities against debris flow and driftwood,” Technical Note of National Institute for Land and Infrastructure Management, No.365, 2007 (in Japanese).
  3. [3] T.Mizuyama and H.Mizuno, “Prediction of debris flow hydrograph passing through grid type control structure,” ASCE, Proceedings of first international conference on debris-flow hazard mitigation, pp. 74-82, 1997.
  4. [4]
    More information can be obtained from following web sites;
    http://www.sabo-int.org/law/index.html
    http://www.sabo-int.org/guideline/index.html

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 19, 2024